a 12 x 12 tile is 1 square foot. So, you would need 300 tiles to cover 300 square feet
You would need 100 square yards of carpet. 15x20=300 square feet and there are 3 feet in one yard so... 300/3=100 square yards. -------------------------------------- Math: 15 feet X 20 feet = 300 Square feet There are 9 square feet (3feetX3feet) in a square yard - 300 / 9 = 33 1/3
1,2,3,4,5,6,10,12,15,20,25,30,50,60,75,100,150, 300
140% of 300 tablets= 140% * 300= 1.4 * 300= 420 tablets
300 gm of water is approximately 1.323 cups
300,000 is 1,000 times larger than 300. This is calculated by dividing 300,000 by 300, which equals 1,000.
No. of tiles =Area of floor / Area of tiles. area of floor = 300 X 50 sq cm. area of tiles = 20 X10 sq cm.hence, no. of tiles = 300 X50 /200 =75
300 sq ft X 144 sq in/sq ft = 43200 sq in 43200 sq in /(16 in X 16 in) = 169 tiles That is true if the tiles fit exactly. If you have to cut some tiles because the length or width of the floor is not an exact multiple of 16 inches, then you may need more.
300
If you're talking floor tiles as opposed to wall tiles and by 12x12 you mean they are 12 inches square, then the answer is 300. Because each tile is one square foot and a 15'x20' room is 300 square feet. Simple, eh?
If you're talking floor tiles as opposed to wall tiles and by 12x12 you mean they are 12 inches square, then the answer is 300. Because each tile is one square foot and a 15'x20' room is 300 square feet. Simple, eh?
4800 tiles 3*3=9 (area of tiles) 12*12=144 (width in inches) 12*25=300 (length in inches) 144*300=43200 (area of room) 43200/9=4800 (area of room over area of tiles)
Assuming you mean the tiles are 16 inches square - you would need 169 tiles.
The question has been taken to mean hthat the corridor has 180 tiles and each of them covers 300 cm2. That being the case, the area covered is 180*300 = 54000 cm2 = 5.4 m2
175
118
There are 100 cm in a meter, so the wall is 400 cm X 1200 cm. If there is no gap between the tiles: then 400 cm / 4 cm = 100 tiles, and 1200 cm / 4 cm = 300 tiles. So 100 x 300 = 30,000 tiles.
To calculate the number of 6-inch tiles needed for a 25x25 ft room, first convert the room dimensions to inches: 25 ft = 300 inches. The area of the room is 300 inches x 300 inches = 90,000 square inches. Each 6-inch tile covers 36 square inches (6 in x 6 in). Therefore, you would need 90,000 / 36 = 2,500 tiles to cover the entire room.