1.6
Old toilets 5.5 gallons, the minimum on new ones is 1.6 gallons
An old toilet typically uses between 3.5 to 7 gallons of water per flush. In contrast, modern toilets are designed to be more water-efficient, using about 1.6 gallons or less per flush. The significant difference in water usage highlights the benefits of upgrading to newer, low-flow models for water conservation.
Depending on the model, toilets can flush anywhere from .6 (low-flow) to 1.6 (standard now) to 3.5 (older toilets).Gate Tube Toilet Water Saver test conducted at the Stevens Institute of Technology, Center for Environmental Systems in Hoboken N.J., confirm:A 2011 WaterSense designated 1.28 GPF Glacier Bay toilet fixture consumes on average 1.52 gallons per complete cycle.A 1997 WaterSense designated 1.6 GPF American Standard toilet consumes on average 2.07 gallons per complete cycle.A 3.5 gallon American Standard toilet consumes 4.23 to 4.31 gallons per complete cycle.Consumers should be aware that Gallons Per Flush (GPF) does not a represent the total gallons consumed for a complete flush and refill cycle.
5 gallons at least for a home toliet restrants seem to take 3 gallons that's why they are always are out of order who cares how much the water bill is put your toliet at 5 gallons there is more pressure
32 cups in 2 gallons ^-^
The toilet uses about 1.6 gallons per flush.
3.4 gallons it's the new standard
About 1.6 gallons per flush
Old toilets 5.5 gallons, the minimum on new ones is 1.6 gallons
Modern toilets, 13 or 6 litres per flush. Older ones 22 litres per flush.
A standard 1999 toilet tank typically holds around 1.6 gallons of water. However, older models may vary in capacity, ranging from 3.5 to 5 gallons per flush.
Flushometer or tank and bowl?
It takes 5-7 gallons of water per flush.
Modern toilets use 1.6 gallons of water to flush and older models used 3 gallons
Depending on the model, toilets can flush anywhere from .6 (low-flow) to 1.6 (standard now) to 3.5 (older toilets).Gate Tube Toilet Water Saver test conducted at the Stevens Institute of Technology, Center for Environmental Systems in Hoboken N.J., confirm:A 2011 WaterSense designated 1.28 GPF Glacier Bay toilet fixture consumes on average 1.52 gallons per complete cycle.A 1997 WaterSense designated 1.6 GPF American Standard toilet consumes on average 2.07 gallons per complete cycle.A 3.5 gallon American Standard toilet consumes 4.23 to 4.31 gallons per complete cycle.Consumers should be aware that Gallons Per Flush (GPF) does not a represent the total gallons consumed for a complete flush and refill cycle.
You use anywhere from 1 cup of water to 5 cups of water to flush the toilet. This is per time you flush the toilet.
The answer is unknown. In order to answer this question you need to know the pressure of the water.