answersLogoWhite

0

What else can I help you with?

Continue Learning about Basic Math

How many 2x6x16' are in bundle?

A typical bundle of 2x6x16' lumber usually contains 80 pieces. However, the exact number can vary by supplier or specific product. It's always best to check with the supplier or manufacturer for the precise count in a bundle.


How do you bundle money for the bank?

$1 bills = $100 money bundle $2 bills = $200 money bundle $5 bills = $500 money bundle $10 bills = $1,000 money bundle $20 bills = $2,000 money bundle $50 bills = $5,000 money bundle $100 bills = $10,000 money bundle


How many linear feet does a bundle of starter shingles?

Depending on which manufacturer of starter shingles you prefer, you will get 100 linear feet, give or take a couple of feet for some brands. If using 3-tab shingles as a starter shingle, you will get roughly 78 linear feet per bundle.


How many bundles of shingles will cover 800 square feet?

To determine how many bundles of shingles are needed to cover 800 square feet, you first need to know the coverage area of a single bundle. Typically, one bundle of shingles covers about 33.3 square feet. Therefore, to cover 800 square feet, you would divide 800 by 33.3, which equals approximately 24 bundles. It's advisable to purchase a few extra bundles to account for waste and any mistakes during installation.


How many linear feet does bundle of starter shingle cover?

A bundle of starter shingles typically covers about 33 linear feet when installed at a standard exposure of 5 inches. This coverage can vary slightly depending on the specific product and manufacturer, so it's important to check the packaging for precise coverage details. Starter shingles are usually used along the eaves and rakes to provide an extra layer of protection against water infiltration.

Related Questions

How many 2x6x16' are in bundle?

A typical bundle of 2x6x16' lumber usually contains 80 pieces. However, the exact number can vary by supplier or specific product. It's always best to check with the supplier or manufacturer for the precise count in a bundle.


How many square feet in a 2x6x16 board?

7.5 square feet


How many 2x6x16 on a pallet?

The number of 2x6x16 lumber boards on a pallet typically depends on the specific pallet size and the weight capacity. However, a standard pallet can generally hold around 50 to 60 pieces of 2x6x16 lumber. It's best to check with the supplier for exact quantities, as variations can occur based on packaging and handling practices.


How many 2X6 studs in a bundle?

Usually there are 10 in a bundle.


How many steel bars in 10mm bundle?

1 bundle 10mm ms rod= how many rod


How many bundle branches does the heart have?

There are two bundle branches, right and left.


How many grams of kale in a bundle?

1000 times the weight of the bundle in kilograms.


How many hundred dollar bills are in a bank bundle?

100 bills in a bundle of $100,each bundle is worth 10,000 dollars


How many square feet are in a 2x6x16?

A 2x6x16 board would have a total of 192 square feet. This is calculated by multiplying the length by width (16 x 6 = 96 square inches) and then converting square inches to square feet (96 sq in ÷ 144 = 0.67 sq ft). Finally, the answer is multiplied by 2 since there are two sides to the board.


How many pieces of the party supply do I get in one bundle?

That will depend on the bundle you choose to purchase for your party.


What is the weight of one 25 mm diameter bar bundle?

It depends on what material and how many there are in the bundle.


How many bricks are there in a bundle?

About 500