The concept is confusing but the math is pretty simple...
The formula is 324 divided by 1.78= # of tiles
Soooo once you know the sq feet you need, add a little for waste & breakage & ooops cuts & you will have enough..
The fact that a good tile setter starts in the middle of the room & works out also means you may have a fair bit of cutting one all the walls but a centered look is much better and likely allows you to use the pieces up.
You will need 3.5 square yards of material to cover 32 square feet.
To cover 100 square feet with 24x24 inch tiles, first convert the tile size to square feet. A 24x24 inch tile is 2x2 feet, which equals 4 square feet per tile. Therefore, to cover 100 square feet, you would need 100 ÷ 4 = 25 tiles. So, you need 25 tiles to cover 100 square feet.
If the 6x12 tiles are in inches, it will take two of them to cover a square foot. You will need 210 of them.
You will need at least 32 square yards of carpet to cover that area.
144 square feet. Multiply length by width - the result is the area in square feet.
How much cement is needed to cover 192 square feet of area
You will need 988 square feet of linoleum.
You will need 234 square feet of turf to cover that area.
To cover 192 square feet, you need 192 square feet of covering. If you happen to buy it in 4' x 8' pieces, then exactly six pieces do the job.
l2 math.
You would need 20 square yards of carpet which is 180 square feet.
Each tile will cover 2 square feet. You have 64 square feet. You will need 32 tiles.
You will need 3.5 square yards of material to cover 32 square feet.
15 x 14 is 210 square feet. If one box is 45 square feet, you'll need 5 boxes.
We only need length times width to calculate area. Half a foot by 10 feet = 5 square feet. You'd need 60 of them to cover 300 square feet.
630 square feet = 70 square yards.
You will need at least 67 tiles. This will cover 150.75 square feet.