That depends on what depth you want the concrete !
1.042 CF of concrete per unit
Spread it evenly, then leave your hands in the cement for 4-6 hours to spread excess cement.
First, things are not made of cement- they are made of concrete- which consists of cement, sand, gravel and water. Mix them using 1 part cement, 1.5 parts sand, 3 parts gravel. To calculate how much CONCRETE you need, multiply depth X width X length in inches, then divide by 1728. This will tell you the number of cubic FEET of concrete. To get the number of cubic YARDS, divide the cubic feet by 27. If you are using packaged concrete mix (Sakrete is one) then an 80 lb bag makes 0.6 cubic feet of concrete. NOTE: If you are working with concrete for the first time- do not add too much water (weakens the concrete) and do not get wet concrete on bare skin- it will cause a chemical burn. Wash it off promptly if you do.
According to the website Concrete Network, in 2008 the average price of concrete in the United States was $75 per cubic yard. That price includes the mixing of the concrete by a professional installer. The website Servicemagic lists the price at $70 per cubic yard.
How much cement sand and stone do you need for 1 cubic meter of concre
4 bags of 50 kg each= 200 kg of cement.
Cement content varies on concrete type, but is typically 400kg per cubic metre. According to the manufacturer, Portland Cement (which is what 99.9% of all cement actually is) has a density of 1505kg/cubic meter.
The cement density is used in the calculation of the total aggregate content and of the concrete density.Normal concrete has a density around 2400 kg/cubic meter or 4048 lb/cubic yard. There are many different kinds of concrete, many of which are much lighter. Cement is the liquid (or paste like) form, and tends to be much heavier than when it has cured into concrete. "Cement" is not concrete, but can be used to make concrete by mixing with sand, stone and water. The density of cement is about 3120kg/m3.
The cement density is used in the calculation of the total aggregate content and of the concrete density.Normal concrete has a density around 2400 kg/cubic meter or 4048 lb/cubic yard. There are many different kinds of concrete, many of which are much lighter. Cement is the liquid (or paste like) form, and tends to be much heavier than when it has cured into concrete. "Cement" is not concrete, but can be used to make concrete by mixing with sand, stone and water. The density of cement is about 3120kg/m3.
For plain cement concrete, the aggregate used is of size 20 mm. For RCC structures, it is 40mm and for roads, it is 80mm
Which Grade?
0.3 cubic meter cement mortar consumes.
It depends on the type of structure according to the load subjected
1 cubic yd of a concrete mixture contains about 500 hundred lbs of cement
Well, darling, the typical amount of cement in 1 cubic meter of concrete is around 350 kilograms. But hey, don't get too hung up on the numbers, just make sure you mix it well and pour it right. After all, concrete is like a good cocktail - it's all about the balance and getting the job done with a little flair.
Normal concrete has a density around 2400 kg/cubic meter or 4048 lb/cubic yard. There are many different kinds of concrete, many of which are much lighter. Cement is the liquid (or paste like) form, and tends to be much heavier than when it has cured into concrete. "Cement" is not concrete, but can be used to make concrete by mixing with sand, stone and water. The density of cement is about 3120kg/m3.