0
What else can I help you with?
How much concrete for 6X6 POST 36 deep?
I use one bag to 1 1/2 bags per hole and fill the rest of the way back with tamped topsoil... whatever came out of the hole.
How much concrete does it take to fill a 2'x2'x4' square hole?
To fill a 2'x2'x4' square hole, you first calculate the volume in cubic feet. The volume is 2 ft x 2 ft x 4 ft = 16 cubic feet. Therefore, you would need 16 cubic feet of concrete to fill the hole. If you need to convert this to cubic yards, it would be approximately 0.59 cubic yards, since there are 27 cubic feet in a cubic yard.
How much concrete do you need to buy to fill a 2 cubic meter hole?
To fill a 2 cubic meter hole, you need to purchase 2 cubic meters of concrete. It's advisable to account for some extra material to accommodate spillage or minor miscalculations, so consider buying an additional 10% more, which would bring the total to about 2.2 cubic meters. Always check with your supplier for specific requirements and volume calculations.
How much cement to fill a 16x8x16 block?
1.042 CF of concrete per unit
How much concrete to fill 18x14ft x2 in deep?
42 cubic feet or 1.56 yards.
How much dirt is in a 2x2x2 hole?
There is no dirt. It's a hole.
How much concrete to fill hole 6 ft x 10in?
A hole with two dimensions has no third dimension. → its volume is 6 ft × 10 in × 0 ft = 0 ft³ → You require NO concrete to fill a hole which is given as an area as it has NO volume.
How much concrete does it take to fill a 10 inch wide x 36 inch deep hole?
Depends on the length of the hole.
How much concrete to fill 7inx5inx6ft hole?
17.5 cubic feet or about 3/4 of 1 cubic yard.
If you drill a hole 40 feet deep by 24 inches in diameter how much concrete will it take to fill it in?
18.6240 yd³
How much concrete will you need to fill a hole that is 18 inches around and 24 inches deep?
about 432 cubic inches
How much concrete do you need to fill a hole 6 inches by 42 inches?
None, as a hole which is 6 inches wide and 42 inches long has no depth and thus no volume.
How much concrete is needed to fill a hole 12'' in diameter and 24 inches deep?
To calculate the volume of concrete needed to fill a hole with a diameter of 12 inches and a depth of 24 inches, first convert the dimensions to feet: the diameter is 1 foot and the depth is 2 feet. The radius is 0.5 feet. Using the formula for the volume of a cylinder (V = πr²h), the volume is approximately 3.14 × (0.5)² × 2 = 1.57 cubic feet. Therefore, you need about 1.57 cubic feet of concrete to fill the hole.
How much is a yard of concrete currently?
How much concrete is required to fill 100 cu feet
How much concrete for 6X6 POST 36 deep?
I use one bag to 1 1/2 bags per hole and fill the rest of the way back with tamped topsoil... whatever came out of the hole.
How much fluid to put in a 1998 bravada transfer case?
Fill it till it runs out of the fill hole. Again that's the FILL HOLE, not the DRAIN HOLE. They are separate.
How much concrete to fill a 2 meter by 450mm diameter hole?
(0.45/2)2 x pi x 2 = 1/3rd of a cubic meter
