There are many different sizes of bath. A common size of bath might hold 350L, but baths can vary from 200L to 1000L or more.
The amount of water required to fill a bathtub varies depending on its size and design, but an average bathtub typically holds between 40 to 80 gallons (150 to 300 liters) of water. A standard full-size bathtub usually takes about 50 to 70 gallons when filled to the overflow level. To fill a bathtub, it's important to consider the water level desired, as not all of the tub's capacity needs to be filled.
It depends on how big your bathtub is.
A 5-gallon water jug holds about 18.9 liters. Since a dime has a diameter of 1.8 cm and a thickness of 1.35 mm, approximately 2,000 dimes can fit in the jug, depending on how they are packed. Given that each dime is worth $0.10, the total value of the dimes would be around $200.
My father is getting older and can't get in and out of the bathtub by himself. Someone suggested getting a Bath Fitter tub, how much does installation cost?
A toliet uses 7 to 8 lites per flush!
Water in a bathtub is typically measured in liters (L) because bathtubs hold larger volumes of water. For example, a standard bathtub can hold around 150 to 250 liters of water. Milliliters (mL) are used for much smaller volumes, such as measuring liquid ingredients in cooking or small containers. Therefore, for a bathtub, liters is the appropriate unit of measurement.
The amount of water a bathtub can hold varies depending on its size and design, but a standard bathtub typically holds between 40 to 80 gallons (approximately 150 to 300 liters) of water when filled to capacity. Larger soaking tubs may hold more, while smaller tubs will hold less. It's important to consider the weight of the water as well, as a full bathtub can be quite heavy.
Assuming that you are asking does a bathtub hold 350 ml of water: 350 ml of water is not very much water, a typical water bottle that you hold in your hand has more than 350 ml of water in it, so a bathtub big enough to hold a person will hold many times that much.
A bathtub typically holds around 200 liters of water. Since 34,000 milliliters is equivalent to 34 liters, 200 liters is much closer to the capacity of a standard bathtub. Therefore, 200 liters is the correct answer.
I can hold 20 liters of water.
9 liters
75 gallons. Typical bathtub dimensions 5ft x 2 ft x 1 ft (waterline) = 10 cubic ft = ~75 gallons or 284 liters
This aquarium can hold a maximum of 126 liters of water.
Depends on the tub, but usually about 40-50 gallons.
4 liters
A Camelbak typically holds around 1.5 to 3 liters of water.
To determine the volume of water in a half-filled bath, you'll need to know the total capacity of the bathtub. For example, if a standard bathtub holds about 40 gallons (approximately 151 liters) when full, then a half-filled bath would contain about 20 gallons (about 76 liters) of water. The exact volume will vary depending on the specific size and shape of the bathtub.