0
What else can I help you with?
How much mortar between bricks?
One Cm between bricks
How many bricks do I need to build 1m2 of wall?
6o bricks
How many bricks would you need for a wall 8ft high and 16ft long?
Cinderblocks - 144 Typical US red bricks - 1024 Typical UK bricks - 864 --------------------------------------------------- This is for a single thickness and doesn't calculate mortar joints on red bricks but you need a few more for breakage, twisted bricks, etc.
Find out an old brick cost is Rs 1400 for one thousand bricks new bricks cost Rs 2000 for one thousand bricks. If Ramlal bought 500 new bricks how much did he pay?
This question makes no scense therefor no one can awnser it
How many bricks for 64 square feet?
To determine how many bricks are needed for a 64 square foot area, first, you need to know the size of the bricks. For example, standard bricks are typically about 7.5 inches long and 3.5 inches wide, which equals approximately 0.11 square feet per brick. Therefore, you would need about 580 bricks to cover 64 square feet, assuming no waste or spacing. Always consider purchasing extra bricks for cuts and mistakes.
A circular shaped patio had 6in bricks around its border the diameter of the patio was 10ft approximately how many bricks were around the patio?
64
What did the sumerians to protect their cities?
They started to build strong walls around their cities,that were made of mud bricks that were baked in the sun until they were hard.
What the Sumerians do to protect their cities?
They started to build strong walls around their cities,that were made of mud bricks that were baked in the sun until they were hard.
What did the Sumerians do to protect their city?
they did nothing at all
When were the beaumont red bricks made?
Beaumont Bricks were made up to around 2004
Why did they start using bricks to build The Great Wall of China?
The Ming started usually bricks to build the great wall of China because bricks were more sturdy and stronger then rammed earth and stones.
How long have bricks been around?
Bricks have been used for over 5,000 years, with the earliest known bricks dating back to around 7000 BCE in ancient Mesopotamia. These early bricks were made from mud and sun-dried. The use of fired bricks became more common around 3000 BCE, particularly in regions like the Indus Valley and ancient Egypt, where they were used for construction and architecture.
How much does a strap of bricks weigh?
A strap of bricks typically weighs around 2,500 to 3,000 pounds. The weight can vary depending on the size and type of bricks being used.
How many bricks are in a bundle?
About 500
Where can you find free bricks?
You can look around you at renovation and demolition sites. It is easy to find there free bricks. Think also to classified.
How many bricks in a load of bricks?
The number of bricks in a load can vary widely depending on the size of the load and the type of bricks being transported. Typically, a standard pallet of bricks contains around 500 to 1,000 bricks. However, larger trucks can carry multiple pallets, resulting in loads that can exceed several thousand bricks. It's best to check the specifications for the particular shipment to get an accurate count.
How many first class bricks in 100 cft?
In general, there are around 450-500 first class bricks in 100 cubic feet. However, this number can vary depending on the size and shape of the bricks being used.
