0
What else can I help you with?
What is the size difference between standard bed and twin bed?
A Standard bed also known as a full size measures 54 inches in width by 75 inches in length. A twin bed measures 39 inches in width by 75 inches in length.
Will 2 twin box springs fit a full size mattress?
No, two twin box springs will not fit a full-size mattress properly. A full-size mattress measures 54 inches wide by 75 inches long, while a twin box spring typically measures 38 inches wide by 75 inches long. While the length matches, the combined width of two twin box springs (76 inches) exceeds that of a full-size mattress, which would result in an improper fit.
What is width of double bed?
A full (or double) bed in the United States measures fifty-four wide by seventy-five inches long. This is the same length as a standard twin bed, but much wider.
What are dimensions for a full size bedspread?
A full-size bedspread typically measures around 86 to 100 inches in length and 80 to 86 inches in width. These dimensions are designed to cover a standard full-size mattress, which is 54 inches wide by 75 inches long. Bedspreads may vary slightly in size depending on the manufacturer, but these measurements are generally accepted for full-size bedding.
Does two twin box springs equal a full mattress?
No, two twin box springs do not equal a full mattress. A full mattress measures 54 inches wide by 75 inches long, while each twin box spring measures 38 inches wide by 75 inches long. Therefore, two twin box springs would provide a total width of 76 inches, which is wider than a full mattress.
What is the width of the top step in residential pools?
The width of the step can be as little as the distance of the radius of one corner to the full width or length of the pool. k
What are the size of a full size bed?
10' by 12' 12' the length 10' the width
The pool is 28' round by 52 high and is basically full I am not sure how many gallons that would equate to?
Here's a formula for round pools: distance across*distance across*depth*5.9 for rectangles: length*width*depth*7.5 or for a deep end: length*width*((shallow end depth + deep end depth)/2)*7.5 so in your case, 28*28*4.3*5.9=20000 gallons
Which length of shorts will be popular this spring?
Oversize shorts will be popular this spring if the runway shows are any indication. The length comes just past the knee and are full as well.
What size bed do 81x108 bed sheets fit?
This sheet will fit a deep Full XL mattress. Full XL is an uncommon size that is the width of a Full and the length of a Queen. Full XL flat sheets can be as short as 102" for standard depth mattresses and up to 108" for an extra deep mattress. Unfortunately, most sheet sets sold as "Full XL" come with a standard Full flat sheet, which is only 96" long, leaving very little to tuck at the end, especially on an extra deep mattress.
Court of badminton?
The full width of the court is 6.1 metres (20 ft), and in singles this width is reduced to 5.18 metres (17 ft). The full length of the court is 13.4 metres (44 ft).
What is dot or point?
It is a mathematical concept which looks like a full stop. It has a position (in space) but has no dimensions - that is, it has no length or width (unlike a full stop - look through a microscope).
What is the size difference between standard bed and twin bed?
A Standard bed also known as a full size measures 54 inches in width by 75 inches in length. A twin bed measures 39 inches in width by 75 inches in length.
How many meters in a full-size lap pool?
A full size Olympic lap pool is 50 meters in length. The width of the pool depends on space and usage requirements.
What are the measurements of a day bed?
A daybed usually uses a twin size mattress. A twin size mattress is 75 inches in length and 39 inches in width. Some daybeds come with a full-size mattress. In this case, the length would be 75 inches and the width would be 53 inches.
If spring is cut to half then what will be the effect on it's stiffness?
If a spring is cut in half, its stiffness, or spring constant (k), will effectively double. This is because the stiffness of a spring is inversely related to its length; a shorter spring can resist deformation more effectively when a force is applied. Therefore, each half of the original spring will have twice the stiffness of the full spring.
What happens when a stretching or force is applied to the ends of a spring?
The larger the force pulling on a spring, the greater the length in the spring and the more energy that is stored in that spring. When looking at a spring there is a gradient that determines how much force much be used to sqeeze or stretch a spring a given amount. When a spring is stretched, the greater the force that is applied, the greater the change in length of the spring and the greater the amount of energy that is stored in the spring. A link is supplied to the Wikipedia article on the spring (device).
