answersLogoWhite

0

In QBASIC, you can continue running a program using the shortcut key F5. This key starts the execution of the program from the beginning or resumes it if it was previously paused. If you need to run a specific line, you can use the F8 key to step through the program line by line.

User Avatar

AnswerBot

3w ago

What else can I help you with?

Continue Learning about Basic Math

What are the QBASIC keywords?

QBASIC keywords are reserved words that have special meanings and functions within the QBASIC programming language. They include commands like PRINT, INPUT, IF, FOR, NEXT, and END, which control the flow of the program and perform specific actions. These keywords cannot be used as variable names, as they are integral to the syntax and operation of QBASIC. Understanding these keywords is essential for writing effective QBASIC programs.


What is command in qbasic?

In QBasic, a command is a specific instruction that tells the computer to perform a particular action. Commands can include operations like inputting data, performing calculations, controlling program flow (such as loops and conditionals), and outputting results. Examples of common QBasic commands include PRINT, INPUT, IF...THEN, and FOR...NEXT. These commands form the building blocks of QBasic programs, allowing users to create various applications and scripts.


How i will write a program in qbasic -to display your name multiple times using do whileloop?

QBASIC code/Editor Screen (Press key [F5] to make the program RUN/execute...) ==== (Pressing any key returns you straight back to the Editor screen; where you can either chose to further Edit/Re-Run/or else, Save your program.) Here is another example. CLS COLOR 15, 4, 14 PRINT "Press any key to continue" DO WHILE INKEY$ = "" LOOP FOR c = 1 TO 20 COLOR c, 0 PRINT "Replace this with the name you want to display" NEXT c COLOR 15, 0 END


What does the QBASIC automatically capitalize for you?

EXAMPLE 1 The QBASIC program will, automatically, *capitalize* any reserved 'keyword' which it finds once you've already gone and typed in a line of code; and, then, at the end of that code line, do finally press the [RETURN/ENTER] key...to confirm what you've just gone and typed in. A keyword might be say the PRINT command statement...so, if I were to type inside of the QBASIC editor the following line of code... print 1+1 ...then, the moment I press the [RETURN/ENTER] key when I get to the end of that line...the QBASIC interpreter program will, automatically, change the 'lower case' word: print...to become all UPPERCASE, instead; QBASIC Editor will display the previous line of code I typed in as being... PRINT 1+1 ...thus, I am able to tell immediately that PRINT is a special reserved 'keyword'/or, command statement which the QBASIC program, quite clearly, recognizes and understands. This also helps me the programmer to know if I actually typed in that 'keyword' either correctly/or, incorrectly; if wrong...and, the program did NOT automatically capitalize it...; then, I know I must have either accidentally 'misspelled' the keyword/or, must otherwise have done something to go get it wrong...?! EXAMPLE 2 If I were to type in to the QBASIC Editor program the following line of code using all 'lower case' letters... x=10: if x=10 then print "ten" else print "NOT ten" ...and, then, when I've reached the end of that line of code, press [RETURN/ENTER] key to confirm my code entry; the QBASIC interpreter program will, automatically, respond by capitalizing any reseved 'keywords' that it finds; then, QBASIC Editor displays the line of code I typed in as being... x=10 : IF x=10 THEN PRINT "ten" ELSE PRINT "NOT ten" Looking at this newly capitalized line...it tells me that... IF/THEN/ELSE/PRINT...are all QBASIC reserved 'keywords'. NOTE: Whatever is a string a text that is written in between double quote marks: ("") will be totally unaffected by such capitalizing; instead, text strings will be printed out, quite literally, 'as is'. FINAL NOTE There are far too many QBASIC 'keywords' for me to go and list here; possibly, a couple hundred...! QBASIC has many 'keywords' that it uses; if you wish to see what ALL of these keywords are; then, from inside of the QBASIC Editor program itself...do a combination key press of: [SHIFT] + [F1]...and, there you will see the Help file...that shows each 'keyword' you can use to write QBASIC programs with; as well as, offering a clear explanation/it shows 'example codes' demonstrating exactly how each of these 'keywords' should be used; just do 'copy & paste'/then, RUN the program to follow these examples along.


Write a qbasic program to display A NEW LINE?

In QBasic, you can display a new line using the PRINT statement. To create a new line, you can simply use an empty PRINT statement. Here’s a simple example: PRINT "This is the first line." PRINT ' This will create a new line. PRINT "This is the third line." This program will display the first line, then move to a new line, followed by the third line.

Related Questions

What is the shortcut key for input statement in QBasic?

There is no shortcut key of input in qbasic


How do you stop a program from running in QBASIC?

To stop a program from running in QBASIC, you can press "Ctrl" + "Break" on your keyboard. This interrupts the program execution and returns you to the QBASIC command prompt. Alternatively, you can close the QBASIC window to terminate the program. If you want to exit gracefully, you can also use the END statement in your code to stop execution at a specific point.


How do you start QBASIC in windows Vista?

To start QBASIC in Windows Vista, first, ensure you have the QBASIC executable file (QBASIC.EXE) available on your computer. Open the Start menu, select "Computer," and navigate to the folder where QBASIC.EXE is located. You can run QBASIC by double-clicking the executable file or by opening the Command Prompt, navigating to the folder using the "cd" command, and typing "QBASIC" to launch the program. If you encounter issues, consider running it in compatibility mode for older versions of Windows.


What command statement terminates the qbasic program?

END '...END of program/halt program code execution. *NOTE*: There should be only 'one' END statement written inside of a QBASIC program. I have seen example code where they use multiple END statements; this is wrong!


What is the explanation for the two modes of QBASIC?

(1) Immediate mode In this mode, QBASIC performs the command/instruction that we type in immediately after we press the enter key. (2) Program mode In this mode, the instructions/commands we type in are not performed as we type them in, but are first stored in the computer memory as a program. This program can be executed later, at a high speed.


How do you write a qbasic program to find area and circumerence of a circle?

Write a program that calculates the area of a triangle in QBASIC


Write a program in qbasic to make a hut using print statemant?

a triangle then a square :)


What are the QBASIC keywords?

QBASIC keywords are reserved words that have special meanings and functions within the QBASIC programming language. They include commands like PRINT, INPUT, IF, FOR, NEXT, and END, which control the flow of the program and perform specific actions. These keywords cannot be used as variable names, as they are integral to the syntax and operation of QBASIC. Understanding these keywords is essential for writing effective QBASIC programs.


What has the author H Tornsdorf written?

H. Tornsdorf has written: 'Windows 3.1 - Trucos y Consejos' 'QBasic for beginners' -- subject(s): QBasic (Computer program language)


How do you open a Qbasic file?

QBASIC GRAPHICS There any many different things you can draw in QBASIC; ranging from... -dots -lines -rectangles -circles -shapes empty/or, filled in(painted) -you can even do LOGO style programming to draw graphics with; by joining up connected lines -animations are possible, too ==== QBASIC BUILT-IN HELP FILE + CODE EXAMPLES In order to view the QBASIC built-in Help file...; first, load the QBASIC program itself...; and, then, do a combination key press of: [SHIFT] + [F1] Use the built-in QBASIC Help file to learn more about how to use these 'graphic related' commands, and, more...! The QBASIC Help file also contains plenty of 'example codes'; which you can just use 'copy & paste'; then, RUN...to see what the output effect will be...???


Is qbasic a high level language?

The QBASIC program actually comes in 2 different flavors... A> QBASIC interpreter program: QBASIC Version 1.1 B> QBASIC compiler program: QBASIC 4.5/or, QB64/or, -etc. ...so, the answer is that this programming language comes in both forms: 'interpreter/compiler' versions; and, you have to select which of these you would prefer to download and use. *NOTE*: The compiler version of the language tends to be much larger; whereas, the interpreter version of the language tends to be small/very compact, indeed; thus, the interpreter tends to take up far less disk space. Many people start off their programming career by using QBASIC version 1.1 'interpreter' program; in order to learn 'how to' program. The interpreter version of the program can only create plain text (.bas) files; the which code CANNOT be shared with others; (not unless the persons who you are sharing this type of code with do already have a copy of the QBASIC interpreter program installed on their own computer). Then, later on, down the line...when they have become fully capable programmers themselves; they go and download a QBASIC 'compiler' program version, instead; which will allow them to go and create stand alone (.exe) program files that they can share with anybody. This is because (.exe) program files can RUN/execute entirely independently of the QBASIC program itself.


How do you open a saved Qbasic file in QBASIC itself to edit it?

IF THE QBASIC IDE/INTEGRATED DEVELOPEMENT ENVIRONMENT *IS* ALREADY OPEN Inside of QBASIC IDE/Integrated Development Environment...; you load in QBASIC programs as follows... 1. Use your mouse to click the QBASIC Menu option being seen top right... File > Open ...then, browse through the file list box to load your chosen program file. 2. Alternatively, you can also use keyboard short cut... [ALT]+[F], this opens up the file menu...then, press [O] ...does exactly the same as above IF THE QBASIC IDE/INTEGRATED DEVELOPMENT ENVIRONMENT IS *NOT* ALREADY OPEN 3. Another way is to open up a command line window prompt: (>)... Click [Start] button ...then, type: Command .../or, type: Cmd ...at least, one of the above should work... ...and, run the QBASIC program from there... by typing in after the command line prompt: (>)... c:\> cd, means, change directory folder... cd C:\pathToQbasic For example the file path name to where my version of QBASIC is stored here... c:\basic\qb64 So, I would first change to this folder directory by typing in after the prompt: (>)... c:\>cd c:\basic\qb64 ...this changes my command line prompt: (>) to say... c:\basic\qb64> Inside of the [qb64] folder directory, I wrote a very simple program called: hw.bas ...which contains the following single line of code... PRINT "Hello, world!" I can launch both the QBASIC program: [qb64.exe]/and, at the same time load in my chosen program file: [hw.bas], by typing after the command line prompt: (>)... C:\Basic\qb64>qb64 hw.bas ...the QBASIC program instantly loads: [qb64.exe]/with the program file [hw.bas] already being displayed inside of the Editor Screen. Next, I only need to press function key [F5] to RUN/make that program file execute... QBASIC Output Screen... Hello, world! Press any key to continue...