answersLogoWhite

0

Use a sharp firm bladed putty knife, chisel, or paint scraper.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Does Liquid Nail work on concrete for bonding materials?

Yes, Liquid Nail is a construction adhesive that can be used on concrete to bond materials together.


How can I effectively remove nails from concrete?

To effectively remove nails from concrete, use a pry bar or a hammer and a nail puller. Position the pry bar or nail puller under the nail head and apply pressure to lift the nail out of the concrete. Be sure to wear safety goggles and gloves to protect yourself during the process.


What are the best practices for installing a nail anchor securely in concrete?

To install a nail anchor securely in concrete, follow these best practices: Drill a hole in the concrete using a hammer drill and the correct size masonry bit. Clean out the hole to remove any debris. Insert the nail anchor into the hole and tap it in gently with a hammer. Use a setting tool to drive the nail anchor into the concrete until it is flush with the surface. Allow the anchor to cure according to the manufacturer's instructions before applying any load.


What is concrete nail?

a nail designed to penetrate concrete and hold


How do you remove nail polish remover from a stained concrete floor?

Pure acetone. the main solvent in nail polish remover is acetone the acetone has changed the colour of the stain on the concrete, wash the area afected with pure acetone reapeat several times this will remove the other ingredents in the nail polish remover if the stain on the concrete does not return to its natural colour then sand it and restain.


How good is liquid nail at holding wood posts to concrete?

Any sort of post that you are going to be attaching to concrete needs to be securely fastened to the concrete using nuts and bolts. Liquid nails is a strong product but does not give assurance that the posts will be securely fastened to the concrete.


How do you remove liquid nails from painted doors?

use aliqid nail remover


Can you sand the drywall to remove the liquid nail residue enough to tile over?

There should be no Liquid Nail residue on drywall . If there is a considerable quantity of it, it's easier to cut the board out and replace it .


What is the best way to remove nail polish from skin?

The best way to remove nail polish from skin is to put nail polish remover on a cotton ball and put it on the part of your skin and rub it after you get it off make sure you wash the area you put nail polish remover on


How can I safely remove concrete nails from a surface?

To safely remove concrete nails from a surface, use a pry bar or claw hammer to carefully pull them out. Wear gloves and eye protection to prevent injury. If the nails are difficult to remove, consider using a nail puller tool or a power drill with a nail removal bit. Be cautious to avoid damaging the surface while removing the nails.


What is the best technique for driving a masonry nail into concrete effectively?

The best technique for driving a masonry nail into concrete effectively is to first drill a pilot hole using a masonry drill bit that is slightly smaller than the nail. Then, use a hammer to gently tap the nail into the pilot hole at a 45-degree angle to avoid bending the nail. Make sure to use firm and consistent pressure while driving the nail to ensure it goes in straight and securely.


How can you get nail polish off your concrete driveway?

nail polish remover