Add Fluorescence to EPhys, Pclamp Ca2+, Fluo-dyes, FRET, Na2+, pH
it supports the upper part of the microscope where the eyepiece, draw tube , body tube and the objectives is placed .
To draw and label six major parts of a plant cell, start by drawing the cell membrane, nucleus, mitochondria, chloroplasts, vacuole, and cell wall. Each part should be labeled with its corresponding name. Be sure to include any necessary details, such as how the chloroplasts are only found in plant cells.
I'm unable to physically draw a diagram. However, a compound microscope consists of two lens systems: the objective lens and the eyepiece. Light passes through the specimen, is magnified by the objective lens, then further magnified by the eyepiece before reaching the observer's eye. The compound microscope is used for magnification of small objects and has a higher magnification capability compared to a simple microscope.
There are many parts needed to make a microscope. Some of the parts of a microscope include the eyepiece lens, arm, base, tube, illuminator, objective lenses, diaphragm, and condenser lens.
The base of the microscope supports the entire instrument and provides stability. Additionally, the arm holds the upper parts of the microscope, such as the stage and eyepiece, in place. Both the base and arm work together to support the entire body of the microscope.
draw and label a mitochondrion surrounded by cytoplasm.
mollusca(phlum)
mahal ko si lowell...
No drawings are possible.
Frame types with neat sketch
A cartridge has 4 parts, the bullet, the casing, the primer, and the powder charge.
You will first need to know all of the parts necessary before beginning. Then you can draw out the diagram and label all the parts.
it supports the upper part of the microscope where the eyepiece, draw tube , body tube and the objectives is placed .
You might want to look up an image online. You can use this to draw your own diagram and label the parts.
Draw and label line Ab
Draw a softball pitch and label the following features.
1.Draw and label the different types of angle?