0
The most suitable unit for measurement is the milliliter and the beaker that is most suitable for accurate and precise measurement is the graduated cylinder.
Wiki User
∙ 11y ago
Wiki User
∙ 11y ago1. Any graduated cylinder is suitable to measure the volume of a liquid (or fine powder).
2. A graduated cylinder is not suitable for heating chemicals.
Wiki User
∙ 14y agoi think for mesureing volume
Asare Jason
mm2
Anonymous
Glass
Add your answer:
Earn +20 pts
A pair of short cylinders each made up of nine fibres?
Centrioles
Short cylinders formed of microtubules?
Centrioles are two short cylinders that are located near the nucleus and are oriented at right angles to each other. Nine triplets of microtubules are arranged in a circular pattern to form the wall of each cylinder.
What structures make up the fibers of the mitotic spindle?
Mitotic spindles are made up of microtubules. Microtubules are hollow cylinders that have a diameter of about 25nm
What is a measuring cylinder used for?
It is to measure liquids to specific amounts to be used in the scientific experiments. Sometimes called a graduated cylinder usually ruled with lines at each millilter or fraction thereof. A more common example would be a measuring cup ruled or marked in fractions of a cup though not all measuring cups have circular cross-sections.
Why are hollow bones stronger than solid ones?
Summary Controlled Failure of Hollow Rock Cylinders in Uniaxial Compression Detailed consideration is given to the behavior of hollow rock cylinders loaded in uniaxial compression. Elastic stress distributions calculated by the finite element method show that radial stresses are considerably lower in hollow than in solid cylinders, and that the uniformity of the stresses can be improved considerably by using loading platens having the same cross-section as the specimen. Servo-controlled uniaxial compression tests carried out on solid and thick-walled cylinders of white Tennessee marble show no essential differences in the behavior of the two specimen types with similar strengths and fracture phenomena being observed. In tests carried out in servo-controlled, stiff, and conventional machines, the progressive formation of large numbers of short subaxial cracks is followed by the development of macrofractures such as slabbing and shearing well past the peak of the stress-strain curve. SummaryControlled Failure of Hollow Rock Cylinders in Uniaxial Compression Detailed consideration is given to the behavior of hollow rock cylinders loaded in uniaxial compression. Elastic stress distributions calculated by the finite element method show that radial stresses are considerably lower in hollow than in solid cylinders, and that the uniformity of the stresses can be improved considerably by using loading platens having the same cross-section as the specimen. Servo-controlled uniaxial compression tests carried out on solid and thick-walled cylinders of white Tennessee marble show no essential differences in the behavior of the two specimen types with similar strengths and fracture phenomena being observed. In tests carried out in servo-controlled, stiff, and conventional machines, the progressive formation of large numbers of short subaxial cracks is followed by the development of macrofractures such as slabbing and shearing well past the peak of the stress-strain curve. Summary Controlled Failure of Hollow Rock Cylinders in Uniaxial Compression Detailed consideration is given to the behavior of hollow rock cylinders loaded in uniaxial compression. Elastic stress distributions calculated by the finite element method show that radial stresses are considerably lower in hollow than in solid cylinders, and that the uniformity of the stresses can be improved considerably by using loading platens having the same cross-section as the specimen. Servo-controlled uniaxial compression tests carried out on solid and thick-walled cylinders of white Tennessee marble show no essential differences in the behavior of the two specimen types with similar strengths and fracture phenomena being observed. In tests carried out in servo-controlled, stiff, and conventional machines, the progressive formation of large numbers of short subaxial cracks is followed by the development of macrofractures such as slabbing and shearing well past the peak of the stress-strain curve. Summary Controlled Failure of Hollow Rock Cylinders in Uniaxial Compression Detailed consideration is given to the behavior of hollow rock cylinders loaded in uniaxial compression. Elastic stress distributions calculated by the finite element method show that radial stresses are considerably lower in hollow than in solid cylinders, and that the uniformity of the stresses can be improved considerably by using loading platens having the same cross-section as the specimen. Servo-controlled uniaxial compression tests carried out on solid and thick-walled cylinders of white Tennessee marble show no essential differences in the behavior of the two specimen types with similar strengths and fracture phenomena being observed. In tests carried out in servo-controlled, stiff, and conventional machines, the progressive formation of large numbers of short subaxial cracks is followed by the development of macrofractures such as slabbing and shearing well past the peak of the stress-strain curve. Summary Controlled Failure of Hollow Rock Cylinders in Uniaxial Compression Detailed consideration is given to the behavior of hollow rock cylinders loaded in uniaxial compression. Elastic stress distributions calculated by the finite element method show that radial stresses are considerably lower in hollow than in solid cylinders, and that the uniformity of the stresses can be improved considerably by using loading platens having the same cross-section as the specimen. Servo-controlled uniaxial compression tests carried out on solid and thick-walled cylinders of white Tennessee marble show no essential differences in the behavior of the two specimen types with similar strengths and fracture phenomena being observed. In tests carried out in servo-controlled, stiff, and conventional machines, the progressive formation of large numbers of short subaxial cracks is followed by the development of macrofractures such as slabbing and shearing well past the peak of the stress-strain curve. Summary Controlled Failure of Hollow Rock Cylinders in Uniaxial Compression Detailed consideration is given to the behavior of hollow rock cylinders loaded in uniaxial compression. Elastic stress distributions calculated by the finite element method show that radial stresses are considerably lower in hollow than in solid cylinders, and that the uniformity of the stresses can be improved considerably by using loading platens having the same cross-section as the specimen. Servo-controlled uniaxial compression tests carried out on solid and thick-walled cylinders of white Tennessee marble show no essential differences in the behavior of the two specimen types with similar strengths and fracture phenomena being observed. In tests carried out in servo-controlled, stiff, and conventional machines, the progressive formation of large numbers of short subaxial cracks is followed by the development of macrofractures such as slabbing and shearing well past the peak of the stress-strain curve.
What is the appropriate unite of measure for a liquid in a gradated cylinder?
Liters is the appropriate unit. Milliliter can also be used.
When did Hellen Keller tour the world?
right after she gradated from collage
When and why are sleeved cylinders used?
Why sleeved cylinders are used is when you want to increase the strength of the cylinder wall
What collige hellen Keller go to?
She went to Radcliffe College. She gradated in 1904.
What is the content of gas cylinders used in kitchens?
Gas cylinders used in kitchens would normally contain propane.
What are fluid power cylinders used for?
Companies in the fluid power cylinders and actuators industry manufacture hydraulic and pneumatic cylinders used in various devices, such as jacks, lifters, and machine tools.
Which characteristic of a gas is used in supplying oxygen cylinders to hospitals?
Compressibility. A lot of gas is forced into the cylinders.
What material used in making LPG gas cylinder?
Pressurized cylinders for LPG are made of steel.
Which can be used as prism?
Cylinders and cuboids are types of prisms.
What does the term fanuc mean?
The term fanuc is used in the world of art when referring to painting a dark color over a lighter tint with a very gradated and gradual change over a very large plane or area.
Lame's theory is used for thick or thin cylinder?
It is used for thick cylinders
What are double-acting hydraulic cylinders used for?
Double-acting cylinders work similarly, but oil is pushed against one side of the cylinder, thus allowing a push or pull motion; these cylinders are used in construction machinery such as cranes and earth-moving machines.
