answersLogoWhite

0

  1. Shade Leaves-In some plants, leaves with barely noticeable or unnoticeable modifications will occur right alongside those that are unmodified. Leaves in the shade tens to be thinner and have fewer hairs than those on the same tree exposed to direct light. In addition, they are generally larger and have less defined mesophyll layers and reduced numbers of chloroplasts than their better lit counterparts.
  2. Leaves of Arid Regions-In growing environments with extremely arid conditions, the plants will generally have thicker more leathery leaves. Their stomata are usually reduced in number and are sunken into the leaf surface in special depressions. Some may have succulent leaves or no leaves at all-where the stem takes over photosynthetic responsibilities-or they may have dense hairy coverings. In areas where the soil freezes and water resources are limited, pine trees may have modifications similar to desert plants. Including sunken stomata, thicker cuticle and a hypodermis (thick walled cells) beneath the epidermis. The compass plant is a unique example of growth set up directionally-East and West-in order to reduce moisture loss.
  3. Tendrils-Many plants have modified leaf structures called tendrils that aid in climbing or supporting the plant's weight. Tendrils are very sensitive to contact and can be readily redirected based on touch and solid contact. Tendrils become coiled like springs and when contact with a support structure is made, the tip not only coils around it but the tip direction reverses. It needs to be noted that not all tendrils are modified leaves, tendrils of the grapevine, for example, are modified extensions of the stem tissue.
  4. Spines, Thorns and Prickles-Desert plants have leaves modified as spines. Water loss is correlated to surface area, so the decrease in leaf surface area consequently decreases water loss to the outside. In plants with spines, photosynthesis is generally conducted by the stem tissue. The tissue is made of sclerenchyma cells and replaces any 'normal' leaf tissues. The modifications arising in the axils of leaves are stem modifications not leaf spines, but thorns. Recall, that the prickles of roses and raspberries are not leaves or stems, but outgrowths of the epidermal or cortex just beneath the prickle.
  5. Storage Leaves-Succulent leaves are leaves modified to retain and store water. Water storage is permitted because of the thin-walled, non-chloroplast parenchyma cells just beneath the epidermis and to the interior of the chlorenchyma tissue. The vacuoles in the non-photosynthetic cells store the extra water resources. There are plants with succulent leaves that have a special photosynthetic process. We will look at these in a later tutorial. The fleshy leaves of onions and lily bulbs store large amounts of carbohydrates which are utilized by the plant in the next growing season.
  6. Flower Pot Leaves-the leaves of some plants, such as the Dischidia plant from tropical Australasia, develop odd pouches that become the symbiotic homes of ant colonies. The colonies carry in soil particles and add nitrogenous wastes, which the leaves collect moisture through the condensation of water vapor via the stomata. The area is a rich medium for the adventitious roots that grow down into the soil contained in the pouch-hence the flower pot function of the modified leaf.
  7. Window Leaves-There are at least three members of the Carpetweed family in the Kalahari desert with unique adaptations to the sandy growing environment. These plants have leaves shaped like ice cream cones. The leaves are buried in the sand, leaving the transparent dime-sized tip of the leaf exposed at the surface. The transparent surface is covered with a thick epidermis and cuticle and has virtually no stomata. This arrangement allows light nearly direct access to the mesophyll with chloroplasts inside. The plant, for the most part, is buried and away from drying winds and abrasive blowing sands. There are other examples of succulent plants with window leaves.
  8. Reproductive Leaves-Walking fern leaves produce new plants at their tips. Air plants, a succulent, have little notches along their leaf margins where new plant are produced with leaves and roots of their own. The baby plants will produce even if the parent leaf is separated from the rest of the plant.
  9. Floral Leaves (Bracts)-Bracts are found at the bases of flowers and are sometimes mistaken as petals. They compensate for small flowers or absent petals. The poinsettia 'flower' is really composed of bracts. The center cluster of tiny flowers is the main event, while the bracts do all the attracting.
  10. Insect-Trapping Leaves-These plants are always attention grabbers and have intrigued folks for centuries. Plants that trap insects usually occur in swampy areas and bogs of tropical and temperate regions. Generally, the soil is lacking some vital ingredient for life and the plants utilize trapped insects and small organisms to fill the gap. The captured prizes are dissolved and absorbed by the plant. However, if insects are not available (i.e. a laboratory situation) the plants will develop if nutrients are given instead. The following four plants represent the four main mechanisms of capture.

--welcome~!!! =p

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Biology

What is the meaning of specialized leaves?

Specialized leaves are modified structures that have evolved to perform specific functions beyond the typical role of photosynthesis. These functions can include storage of water or nutrients, protection from predators, or assisting in reproduction. Examples of specialized leaves include spines of cacti for defense, pitcher plants for trapping insects, and tendrils for climbing.


Lycopods produce sporangia which are produced on the upper surface of modified leaves termed?

The sporangia in lycopods are produced on the upper surface of modified leaves called sporophylls. These sporophylls are specialized structures that bear the sporangia and are crucial in the reproductive process of lycopods.


What is an Example of modified angiosperm?

An example of a modified angiosperm is the Venus flytrap. This plant has evolved specialized modified leaves that can snap shut when triggered by prey, allowing the plant to capture and digest insects for nutrients.


Can you provide examples of modified leaves and explain their functions in plants?

Modified leaves are specialized structures that have evolved to serve specific functions in plants. Some examples of modified leaves include: Tendrils: These are thin, coiled structures that help plants climb and support themselves by wrapping around nearby objects. Spines: Spines are sharp, pointed structures that deter herbivores from feeding on the plant by providing physical protection. Bracts: Bracts are colorful, leaf-like structures that surround flowers and attract pollinators. Storage leaves: These leaves are thick and fleshy, serving as storage organs for water and nutrients during periods of drought or low nutrient availability. Floral leaves: These modified leaves are part of the flower structure and help attract pollinators or protect the reproductive organs. Overall, modified leaves play crucial roles in plant survival, reproduction, and defense mechanisms.


What are some examples of modified leaves and how do they differ from regular leaves?

Some examples of modified leaves include tendrils, spines, and storage leaves. Modified leaves differ from regular leaves in their structure and function. Tendrils are thin and flexible, used for climbing and support. Spines are sharp and protective, deterring herbivores. Storage leaves are thick and fleshy, storing water and nutrients for the plant.

Related Questions

What is the meaning of specialized leaves?

Specialized leaves are modified structures that have evolved to perform specific functions beyond the typical role of photosynthesis. These functions can include storage of water or nutrients, protection from predators, or assisting in reproduction. Examples of specialized leaves include spines of cacti for defense, pitcher plants for trapping insects, and tendrils for climbing.


Lycopods produce sporangia which are produced on the upper surface of modified leaves termed?

The sporangia in lycopods are produced on the upper surface of modified leaves called sporophylls. These sporophylls are specialized structures that bear the sporangia and are crucial in the reproductive process of lycopods.


What is an Example of modified angiosperm?

An example of a modified angiosperm is the Venus flytrap. This plant has evolved specialized modified leaves that can snap shut when triggered by prey, allowing the plant to capture and digest insects for nutrients.


Are pitcher plants leaves or flowers?

They are modified leaves


Can you provide examples of modified leaves and explain their functions in plants?

Modified leaves are specialized structures that have evolved to serve specific functions in plants. Some examples of modified leaves include: Tendrils: These are thin, coiled structures that help plants climb and support themselves by wrapping around nearby objects. Spines: Spines are sharp, pointed structures that deter herbivores from feeding on the plant by providing physical protection. Bracts: Bracts are colorful, leaf-like structures that surround flowers and attract pollinators. Storage leaves: These leaves are thick and fleshy, serving as storage organs for water and nutrients during periods of drought or low nutrient availability. Floral leaves: These modified leaves are part of the flower structure and help attract pollinators or protect the reproductive organs. Overall, modified leaves play crucial roles in plant survival, reproduction, and defense mechanisms.


What are some examples of modified leaves and how do they differ from regular leaves?

Some examples of modified leaves include tendrils, spines, and storage leaves. Modified leaves differ from regular leaves in their structure and function. Tendrils are thin and flexible, used for climbing and support. Spines are sharp and protective, deterring herbivores. Storage leaves are thick and fleshy, storing water and nutrients for the plant.


Are the spines of cacti and the traps of the Venus fly trap modified leaves?

Yes, both the spines of cacti and the traps of the Venus fly trap are modified leaves. The spines on cacti help reduce water loss and protect the plant from herbivores, while the traps of the Venus fly trap are specialized for capturing and digesting insects to supplement its nutrient intake.


What are modified leaves called that are found on embryonic plants?

The modified leaves that are found in embryonic plants are called cotyledons. Cotyledons are the first leaves produced by the plant. They are not true leaves and are considered to be seed-leaves because they are a part of the seed or embryo of the plant.


Why does grass not have leaves?

It does. Blades of grass are in fact specialized leaves.


What are five additional functions that modified leaves can perform?

Storage: Modified leaves can store water, nutrients, and food reserves. Protection: They can have thorns, spines, or hairs to deter herbivores or provide physical protection. Reproduction: Leaves can be modified into structures for vegetative reproduction, such as plantlets or bulbils. Climbing: Some modified leaves, like tendrils, can help plants climb and support themselves. Trapping: Certain modified leaves, like those of carnivorous plants, can capture and digest small prey.


Which plant has flowers but no real leaves?

A Cactus - it has a modified stem which produces flowers, but no leaves.


Are flowering parts modified vegetative leaves?

yes, because you can make salad from the leaves...