answersLogoWhite

0


Best Answer

Ok, there are lots of things one has to do to care for a quality light microscope. So, I'll just give you some commonsense tips.

1. Don't touch any of the lens with your fingers.

2. Store the device in a clean dry box or cabinet, usually with some kind of plastic dust cover.

3. When using the High-Power objective lens, be very careful when focusing not to drive the head of the lens into the cover-slip or slide. Always visually adjust the head of the lens about 1 mm or so above the cover-slip, then looking through the eye-piece, use the "fine" focus control to bring the sample into sharp focus.

4. Always replace damaged parts and components with manufacture recommended replacements. If you must use other manufacture's parts, be sure they have the right specifications for your particular microscope.

5. When moving your microscope from place to place in the lab, use one hand to grip the microscope while supporting it at the base with your other hand. This keeps accidents and the lost of parts to a minimum.

6. Don't leave slide, sample, and cover-slip on the microscope stage for extended periods of time, and when through viewing, raise the objective lens away from the cover-slip and turn the objectives to the lowest power objective len setting. Remove the slide and put the microscope away.

7. If the microscope uses a light bulb as its light source, turn the power off when the microscope isn't actually in use.

8. Cleaning the eye-piece and objective lens, aways follow the manufacture's recommendations and instructions.

Hope that helps.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar
More answers
User Avatar

AnswerBot

1mo ago

When handling a compound microscope, be sure to carry it with both hands, one on the arm and one supporting the base. Always use lens paper to clean the lenses and avoid touching them with your fingers. Make sure to store it in a clean, dry place with the dust cover on when not in use.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

First of all, you should always hold the microscope with both hands, with one hand on the base and the other holding the arm.
Always carry the microscope facing up and close to your body.
When you put a microscope on a table, don't put it too close to the edge where it might fall off.
Don't slide the microscope back and forth on a table.
Wipe the lens with only lens paper, NOT TOILET PAPER, BOUNTY TOWELS, OR ANYTHING ELSE! IT COULD RUIN THE LENSE!
Don't touch the lense with your fingers.
Only use the fine focus when the microscope is on high power. If you use the coarse focus, you can break the slide.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

They are fragile and try not to poke yourself in the eye.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

loksit a website! awan tultulong na. . . jowkeness

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

i ain't know thats y i checked this flipping website

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

Hold it with both hands so it doesn't drop or accidentally hit something.

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

With your hands.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What are the proper ways in handling a compound microscope?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Biology

What is a compound light?

A compound light microscope is an optical instrument that uses multiple lenses to magnify small objects. It is commonly used in laboratories and educational settings for viewing cells, tissues, and other microscopic specimens. The term "compound" refers to the multiple lenses used in the microscope to achieve high magnification.


What is the total magnification of a compound microscope?

The ocular lens are 10x magnification. Objective lens are 4x, 10x, 40x, 100x magnification. So once an objective lens is selected, the total magnification would be given by its product with the 10x magnification of the ocular lens. For example, if objective lens selected is 40x, total magnification would be: (10x)(40x)=400x total.


Ways an experiment can be compromised or contaminated?

An experiment can be compromised by external factors such as equipment malfunction, environmental changes, or human error. Contamination can occur through unintended introduction of substances, improper handling of samples, or cross-contamination between samples. It is important to minimize these risks through proper experimental design, execution, and controls.


What are the three different ways to classify leaves?

Leaves can be classified based on their arrangement on the stem (opposite, alternate, whorled), shape (simple, compound), and margin (entire, serrated, lobed).


What ways would be the microscope contribute to different objects and organisms?

A microscope can help in studying the fine details and structures of objects and organisms that are not visible to the naked eye. It enables researchers to observe cells, bacteria, and other small organisms, thus contributing to advances in fields like biology, medicine, and forensics. Additionally, microscopes can aid in quality control and analysis in industries such as electronics and materials science.

Related questions

10 ways to proper care and handling of the compound microscope?

jemaima


What are 10 ways to proper care in handling the microscope?

While moving the microscope from one place to another, always keep it in an upright position.


Enumerate the proper ways of handling and caring the microscope?

hold it with both hands soit does notdrop or accidentally hit something.


What are the Various ways of handling Export Sales?

various ways in handling exports sales


What are 2 ways to control light intensity on a compound light microscope?

You can control light intensity on a compound light microscope by adjusting the diaphragm, which regulates the amount of light passing through the specimen, and by using the rheostat or brightness control, which allows you to increase or decrease the overall light brightness.


What is a compound light?

A compound light microscope is an optical instrument that uses multiple lenses to magnify small objects. It is commonly used in laboratories and educational settings for viewing cells, tissues, and other microscopic specimens. The term "compound" refers to the multiple lenses used in the microscope to achieve high magnification.


What are the three ways compound words can be formed?

what are the ways in forming compound words


Write any four protecting methods for food from contamination?

Four ways of protecting food from contamination is proper storage, properly cooking, maintain hygiene and handling the food correctly.


What are the proper ways of using?

List of proper ways of using computers?


What is the proper ways of handling of animals?

Give them enough water and food. Be sure to give your pet the proper food to eat. Don't disturb them in their habitat. Don't disturb them when they are eating. If you want to have some fun with your pet, teach some tricks. Clean and bathe it.


How was the compound microscope invented?

The compound microscope was invented in the late 16th century by two Dutch spectacle makers, Zacharias Janssen and Hans Lippershey. They were able to combine multiple lenses to magnify objects and created the first prototype of a compound microscope.


How can one get jobs in cargo handling?

There are a number of ways that an individual can get a job in cargo handling. One can apply for a cargo handling job at websites such as Workopolis, Indeed and Monster.