0
What else can I help you with?
When observing a slide should the specimen be on the top or bottom surface of the microscope?
The specimen should be placed on the top surface of the microscope slide. This allows the light to pass through the specimen from below and be magnified by the lenses in the microscope to form an image for observation.
Which parts of a microscope forms an enlarged image of a specimens?
The lenses of a microscope form an enlarged image of a specimen.
What is the objective lens on a microscope?
An optical microscope used in a laboratory would have 3 different types of lenses.They are :-(1) Condenser lens- directs light to the specimen if there is no in built light source.(2) Eye piece - lens close to the eye of the observer which magnifies the image created by the objective lens.(3) Objective - These are the lenses which are positioned closest to the specimen mounted on the stage of the microscope which magnifies the specimen. There could be several objective lenses in an optical microscope, generally three. The low power objective (usually magnifies 4 times), mid power objective (usually magnifies 10 times) and the high power objective (usually magnifies 40 times).
Which phase of the cell cycle could you identify most readily with a light microscope Explain your answer?
The interphase stage of the cell cycle is the one that can be most readily identified with a light microscope. This is because during interphase, the cell is carrying out its normal functions and the nucleus is clearly visible. The chromosomes are in their extended form and not condensed as they are during mitosis, making them easier to observe under a light microscope.
What is the ability of a microscope to form images with fine detail?
Resolution is the ability of a microscope to form images with fine detail. It refers to the ability to distinguish between closely spaced objects in an image. High resolution means that the microscope can produce sharp, clear images with fine detail.
When observing a slide should the specimen be on the top or bottom surface of the microscope?
The specimen should be placed on the top surface of the microscope slide. This allows the light to pass through the specimen from below and be magnified by the lenses in the microscope to form an image for observation.
What is the fate of the electrons that interact with a specimen in an electron microscope?
The electrons that interact with a specimen in an electron microscope can undergo scattering, absorption, or reflection. Scattered electrons may form the image, absorbed electrons contribute to specimen damage, and reflected electrons may be used for various types of analysis in the microscope.
What type microscope allows light to pass through the specimen and uses two lenses to form an image?
a compound light microscope
What is a mirror or lamp on the microcopes?
A mirror on a microscope is used to reflect light onto the specimen, providing illumination for observation. A lamp on a microscope is a source of artificial light, commonly in the form of a light bulb, that illuminates the specimen for better visibility under the microscope.
Focal plane of microscope?
Oh, honey, the focal plane of a microscope is where all the action happens. It's the plane where the specimen is in sharp focus, so you can actually see what's going on. Basically, it's like the VIP section of the microscope where everything is crystal clear.
What type of microscope allows light to pass through the specimen and use two lenses to form an image?
A compound light microscope allows light to pass through the specimen and uses two lenses (objective and eyepiece) to form an image. This type of microscope is commonly used in laboratories and educational settings for viewing cells, tissues, and other small specimens in detail.
Which parts of a microscope forms an enlarged image of a specimens?
The lenses of a microscope form an enlarged image of a specimen.
What is the function of condenser in a microscope?
The function of a condenser in a microscope is to focus and direct light onto the specimen being observed. It helps to illuminate the specimen evenly and maximize the resolution and contrast of the image. The condenser also plays a role in controlling the amount of light entering the microscope.
What is the definition for a microscope Illuminator?
A microscope illuminator is a component of a microscope that provides light to illuminate the specimen being observed. It can be in the form of a built-in light source or an external light directed onto the specimen. The illuminator is essential for producing a clear and detailed image under the microscope.
An instrument that allows light to pass through the specimen and uses two lenses to form an image is a?
This instrument is a microscope. It allows the passage of light through the specimen, which is then magnified and focused by the lenses to form an image that can be observed. Microscopes are commonly used in laboratories and educational settings for viewing small objects and structures.
What is the function of the codenser lens in the compound light microscope?
The function of a condenser lens is to focus the light onto a specimen. Condenser lenses are most useful at the highest powers of 400 x and above. Microscopes with a condenser lens render a sharper image than those with no lens. These lenses are able to move up and down.
What is the objective lens on a microscope?
An optical microscope used in a laboratory would have 3 different types of lenses.They are :-(1) Condenser lens- directs light to the specimen if there is no in built light source.(2) Eye piece - lens close to the eye of the observer which magnifies the image created by the objective lens.(3) Objective - These are the lenses which are positioned closest to the specimen mounted on the stage of the microscope which magnifies the specimen. There could be several objective lenses in an optical microscope, generally three. The low power objective (usually magnifies 4 times), mid power objective (usually magnifies 10 times) and the high power objective (usually magnifies 40 times).
