Its a holder u hold on the side.
because of liquids on the slide or to clean the slide
The slide is placed on the stage.
the difference is when a temporary slide has a germ it can come off and on a permanent slide has a germ on it it can't come off
body tube
A well slide is a slide with one or more depressions in it, usually used for viewing marine life.
place holder
by sliding it right side up between the two clips on the slide holder
Place Holder
Pull the cup holder out as far as it will go. Pull up on the seat upholstery right above the cup holder so you can see the very back of the cup holder. There is a tab there. Push down on the tab while pulling out on the cup holder and it will slide right out. Reinstall by lining up in the slide rails and push it back in.
Place Holder
A holder in an enlarger or scanner that positions a film strip or mounted slide.
Jack it up take the Clip holder at the end Of it out & slide it out !!!!!
pull out the cd holder in the bottom, and remove 2 7mm screws. pull the entire holder out and move to side (keep the two wires to the accessory plugs intact). Pull the cup holder out and remove the two 7 mm screws in the back, pointing up. the entire bezel should now come out. With the bezel in your hand, remove the two phillips screws holding the slide base in place. put the new cup holder in place, with one side of the slides engaged. with the holder all the way back, push up until the opposite side slide is engaged. reassemble
You need to take off the 3-4 screws on the slide. then unscrew the 2 screws on the dart holder. Then there are about 10 screws on the main gun. also there are 2-3 under the slide.
you must unscrew the holder it is in. Its tight but when you wiggle it out the top comes up and you just have to slide the oil pan out.
Under the dash on passenger side. black plastic box has cover with slide, slide the holder off the cover, remove cover then pull down on filter. Looks just like a home ac filter.
Test tube Holder, Crucible, Clamp Holder,