The stage clip is used to hold the slide in place on the stage of the microscope during observation. It helps to prevent the slide from moving or shifting while the specimen is being viewed under the lens.
The course adjustment knob on a microscope is used to roughly focus the specimen by moving the stage up and down. It moves the objective lenses relative to the stage to bring the specimen into view. It is typically larger and located on one side of the microscope.
1. Ocular Lens (Eyepiece) - where you look through to see the image of your specimen. Magnifies the specimen 10X actual size. 2. Body tube - the long tube that supports the eyepiece and connects it to the objectives. 3. Nosepiece - the rotating part of the microscope at the bottom of the body tube; it holds the objectives. 4. Objective Lenses - (low, medium, high). Depending on the microscope, you may have 2, 3 or more objectives attached to the nosepiece; they vary in length (the shortest is the lowest power or magnification; the longest is the highest power or magnification). 5. Arm - part of the microscope that you carry the microscope with; connects the head and base of the microscope. 6. Coarse Adjustment Knob - large, round knob on the side of the microscope used for "rough" focusing of the specimen; it may move either the stage or the upper part of the microscope. Location may vary depending on microscope - it may be on the bottom of the arm or on the top. 7. Fine Adjustment Knob - small, round knob on the side of the microscope used to fine-tune the focus of your specimen after using the coarse adjustment knob. As with the Coarse Adjustment Knob, location may vary depending on the microscope. 8. Stage - large, flat area under the objectives; it has a hole in it (see aperture) that allows light through; the specimen/slide is placed on the stage for viewing. 9. Stage Clips - clips on top of the stage which hold the slide in place. 10. Aperture - the hole in the stage that concentrates light through the specimen for better viewing. 11. Diaphragm - controls the amount of light going through the aperture; may be adjusted. 12. Light or Mirror - source of light usually found near the base of the microscope; used to direct light upward through the microscope. The light source makes the specimen easier to see.
A comparison microscope is commonly used to see fingerprints. This type of microscope allows two objects (such as two fingerprint samples) to be viewed side by side, making it easier to analyze their similarities and differences.
A stereo microscope provides a three-dimensional view of the specimen at low magnification, making it suitable for examining larger objects with depth. A compound microscope uses multiple lenses to achieve higher magnification and resolution for viewing smaller specimens, typically in 2D.
The letter "E" would best illustrate how a compound light microscope can invert and reverse the image. When viewed through the microscope, an object's left side appears as the right side and vice versa (reversed), and the object appears upside down (inverted).
The stage on a microscope is typically moved using coarse and fine adjustment knobs located on the mechanical stage assembly. These knobs allow the user to move the stage up and down or side to side to adjust the position of the specimen for viewing.
The course adjustment knob on a microscope is used to roughly focus the specimen by moving the stage up and down. It moves the objective lenses relative to the stage to bring the specimen into view. It is typically larger and located on one side of the microscope.
The microscope stage is typically moved up and down using the coarse focus knob located on the side of the microscope. This knob adjusts the distance between the objective lens and the specimen. On some microscopes, the stage itself can be manually adjusted for fine focusing.
The focus adjustment knob is located on the side of the frame to adjust the focus of the microscope. By turning this knob, you can move the stage up and down to bring the specimen into focus.
Stage and Stage Clips The stage is a platform for the slides, which hold the specimen. The stage typically has a stage clip on either side to hold the slide firmly in place. Some microscopes have a mechanical stage, with adjustment knobs that allow for more precise positioning of slides.
There are two adjustment knobs (coarse and fine) on a microscope so you can move the stage at two different speeds. The coarse moves a lot per revolution, while the fine adjustment knob moves the stage at such small increments that it is nearly impossible to notice when looking from the side. The coarse adjustment knob should be used to get the stage closer to the lens only while you are looking at the microscope from the side. The fine adjustment knob can be used when you are looking into the microscope because there is a much lower chance of running the stage into the lens and breaking it.
A stereo microscope shows two slides side by side at the same time and is used for comparison. A compound microscope only shows one slide.
Nosepiece
Side cutting pliers are used in electronics, to clip off the wires of components once they have been soldered on to a board, without risking too much cutting into the solder.
Stage Left is the left side of the stage from the Actor's perspective. Conversely, Audience Right (from the audience's perspective) is the same side of the stage as Stage Left.
possitive clamper is clip on positive side while negetivr clamper clip towords negetive side
There are orange things on the side of the gun, just above the clip. Pull it, and take out the clip.