4inch pipe diameter
It all depends on which side you are measuring, the inside or the outside. The inside is shorter than the out because of the thickness of the balls covering. According to Wikipedia a tennis ball is 2.63 in. in diameter. The diameter on the inside will be a little closer to 2.50 in. The thickness of the balls covering is measured millimeters, and I don't know what that would be.
Valve stem OD refers to the outer diameter of a valve stem. This measurement is important for determining the size compatibility between the valve stem and other components in a system, such as seals or guides. Choosing the correct valve stem OD ensures proper fit and functionality.
The diameter of Hb molecule is app. 5.5 nm, and that is larger than a glucose molecule.
The normal stool diameter is typically around 2.5 to 5 centimeters.
The average poop diameter of a healthy adult human is about 1 to 1.5 inches.
To find the outside diameter of a pipe with a circumference of 870 mm, you can use the formula for circumference, which is C = πd, where C is the circumference and d is the diameter. Rearranging the formula gives d = C / π. Substituting the values, the diameter is approximately 870 mm / 3.14, which is about 277.5 mm. Therefore, the outside diameter of the pipe is approximately 277.5 mm.
To calculate the outside diameter of a roll of carpet, you can use the following formula: Outside Diameter (in inches) = √[(Weight in pounds / (Width in feet x Length in feet)) * 32] In your case: Weight = 1000 pounds Width = 12 feet Length = 180 feet Outside Diameter (in inches) = √[(1000 / (12 x 180)) * 32] Outside Diameter ≈ √[(1000 / 2160) * 32] Outside Diameter ≈ √(0.1481 * 32) Outside Diameter ≈ √4.7392 Outside Diameter ≈ 2.18 inches So, the outside diameter of a 1000-pound roll of carpet that is 12 feet by 180 feet is approximately 2.18 inches.
To calculate the outside diameter of a steel coil, you first need to determine the inside diameter (ID) and the thickness of the steel material. The outside diameter (OD) can then be calculated using the formula: OD = ID + 2 × thickness. If the coil is wound in layers, you may also need to account for the number of layers by adding the thickness multiplied by the number of layers to the ID.
Radius is the distance from the outside of the circle to the center. Diameter is the distance ACROSS the circle, it's formula is: D = 2R (Diameter is 2 times the Radius) Circumference is the distance AROUND the circle. C = Pi D, where Pi is the constant 3.1415.... (look it up))
nominal diameter is the original diameter of an object
The diameter of a pipe is its width across an open end of the pipe. The inside diameter is the width measuring on the inside of the pipe; the outside diameter is the width measuring on the outside.______________________________________________________________________________________________________For a pipe of circular cross section, its nominal diameter is the diameter of the cross section.The inner diameter is the measuring on the inside of the pipeThe outside diameter is the measuring on the outside of the pipe.
The formula to determine speed is speed = distance / time. To determine the diameter of a circle, the formula is diameter = 2 x radius.
If you are given the radius of the circle, you can use the formula: diameter = 2*radius If you are given the circumference of the circle, you can use the formula: diameter = circumference/pi
The formula for the circumference of a circle is the same, whatever its diameter. Circumference = pi*diameter.
take the outside diameter and subtract the thickness twice.
take the outside diameter and subtract the thickness twice.
take the outside diameter and subtract the thickness twice.