An orifice is an opening or hole, whereas a lumen refers to the inner space or cavity within a tubular structure such as a blood vessel or intestine. In simpler terms, an orifice is an opening, while a lumen is the space inside that opening.
The term for the site of an exit or entrance to an organ is called an "orifice." It refers to an opening or passageway through which substances enter or exit the organ. Examples include the anal orifice or the nasal orifice.
Orifice plates which are used in flow measurement are mostly concentric "square-edge" type. The bore of the orifice is not constant when one moves from the upstream side to the downstream side along the cross section. The bore size is constant for a few mm only and then expands till it reaches the downstream face. This inclined cut is called the bevel in an orifice. The main reason to have a bevel in the orifice is to avoid turbulence thereby providing more accuracy to the measurement. Restriction Orifice plates are not beveled since their intent is to reduce the pressure only.
At the cardiac orifice of the stomach which separates the stratified squamous epithelium of the esophagus from the columnar epitheilium of the stomach. in simpler terms, its between the esophagus and the stomach
The orifice is an opening such as the nostrils, mouth, etc. The sphincter is a muscle. These are like valves that only allow certain materials to go in and out and are often very tight, resulting in the action of peristalsis.
The orifice tube is located between the engine and the fire wall. The windshield wiper cowling has to be removed to gain access to the orifice tube.
It is located in the liquid line or tube between the condenser and evaporator.
The orifice tube is located on the inlet port or the primary evaporator on the passenger side of the firewall. It is nearly hidden behind/between the heater vertical hoses.
The orifice tube is located in the line at the condenser discharge connection.
Many of the GM vehicles have the AC orifice inside the condenser fitting that goes between the condenser and the cabin.
2002 ford taurus where is the orifice tube located
It is located in the metal line between the condensor and evaporator. Look for a small crimp in the line.
It is located inside of a line that routes off of the condenser and splits between the front and rear A/C sections. The line with the orifice tube heads to the firewall on the passenger side of the vehicle. You'll see a crimped area on the line, where the orifice tube is located. I don't believe you can easily replace the orifice tube without cutting/repairing the line or replacing the whole line assembly. The line has several bends negating pulling the orifice tube out. Pretty inconvenient. The rear A/C uses an expansion valve.
it's located between the fire wall and condenser in the high side line...
Bleed or Weep Holes are located at the elevational top or bottom of the Orifice Plate. The Weep Hole is tangent to a circle equal to 98% of the line I.D. DRAIN HOLES are located at the bottom of the Orifice Plate to prevent liquids in a gas or condensate in a steam flow from damming up behind the Orifice Plate. VENT HOLES are located at the top of the Orifice Plate to allow gases in a liquid flow to vent pass the Orifice Plate.
You have a fixed orifice tube is located in the liquid line, between the condenser and the evaporator coil. If the fixed orifice tube is faulty or plugged, the liquid line assembly must be replaced.........
There is no orifice tube on that car. It uses an expansion valve located in the evaporator case under the dash on the passenger side.