scanning-40x
low-100x
high-400x
multiply the magnification of the eyepiece by the magnification of the high objective lens. for example, if the eyepiece magnifies x10, and the high objective magnifies x40, then the total magnification would be 400x
The total magnification is equal to the magnification of the eyepiece multiplied by the magnification of the objective lens. So in this case the objective lens would need to be 100X.
The objective lens that focuses closest to the slide is 100x, it has the longest lens so the highest power. Be careful not to crack the slide and make sure you use oil if it is an oil immersion lens.
The total magnification is calculated by multiplying the magnification of the objective lens by the magnification of the ocular lens. In this case, 4x (objective lens) x 10x (ocular lens) = 40x total magnification.
To achieve a total magnification of 100x, you would use a 10x ocular lens (eyepiece) with a 10x objective lens. The total magnification is calculated by multiplying the magnification of the ocular lens (10x) by the magnification of the objective lens (10x).
The lens with the greatest (positive) curvature. The lens with the highest diopter.
The total magnification of a light microscope with a 40x objective lens is calculated by multiplying the magnification of the objective lens by the magnification of the eyepiece lens. Assuming a standard eyepiece magnification of 10x, the total magnification would be 400x (40x objective lens * 10x eyepiece lens = 400x total magnification).
multiply the magnification of the eyepiece by the magnification of the high objective lens. for example, if the eyepiece magnifies x10, and the high objective magnifies x40, then the total magnification would be 400x
To find the total magnification, you multiply the magnification of the objective lens by the magnification of the eyepiece lens. In this case, if the total magnification is 20x and the objective lens is 45x, you can determine the eyepiece magnification by dividing the total magnification by the objective magnification: 20x / 45x = 0.44x. Therefore, the eyepiece lens would have a magnification of approximately 0.44x.
To calculate the total magnification of a microscope, you multiply the magnification of the objective lens by the magnification of the eyepiece. For example, if the objective lens has a magnification of 40x and the eyepiece has a magnification of 10x, the total magnification would be 40x * 10x = 400x.
The total magnification is equal to the magnification of the eyepiece multiplied by the magnification of the objective lens. So in this case the objective lens would need to be 100X.
Each objective lens has a different magnification. Multiply the magnification of the eyepiece by the magnification of the objective lens to produce total magnification. For example, a 10X ocular lens and a 40X objective lens will produce a total magnification of 400X (10 x 40 = 400).
The objective lens that focuses closest to the slide is 100x, it has the longest lens so the highest power. Be careful not to crack the slide and make sure you use oil if it is an oil immersion lens.
Total magnification is determined by multiplying the magnification of the objective lens by the magnification of the eyepiece. This formula is used to calculate the overall magnification of an image when viewed through a microscope.
Total magnification increases when the objective lens is increased because the objective lens magnifies the image before it reaches the eyepiece lens. The eyepiece then further magnifies the image for viewing.
The total magnification is calculated by multiplying the magnification of the objective lens by the magnification of the ocular lens. In this case, 4x (objective lens) x 10x (ocular lens) = 40x total magnification.
To achieve a total magnification of 100x, you would use a 10x ocular lens (eyepiece) with a 10x objective lens. The total magnification is calculated by multiplying the magnification of the ocular lens (10x) by the magnification of the objective lens (10x).