0
What else can I help you with?
When viewing a specimen under the microscope you should always start with what?
When viewing a specimen under the microscope, you should always start with the lowest magnification objective lens. This allows you to locate and focus on the specimen before moving to higher magnifications for a closer look.
When viewing a specimen under the microscope you should always start with the?
low power objective lens to locate and focus on the specimen before moving to higher magnifications.
How should the condenser and diaphragm be adjusted for optimal viewing?
The condenser should be raised to the uppermost position. This maximizes the amount of light entering the objective lens and minimizes the amount lost to refraction. The diaphragm should be stopped down just enough to provide an acceptable image. The best results are usually obtained by beginning an examination on low power with the diaphragm almost completely closed.
How should the condenser be set when viewing bacteria?
The condensor of microscope is used to control the light intensity so it first depends on the viewer and secondly it should be so adjusted so that the light intesity does not shoots high as it can damage the specimen and is also harmfull to the eyes and even to the microscope. It is also to be see that the specimen view clearly against its background.
When observing a slide should the specimen be on the top or bottom surface of the microscope?
The specimen should be placed on the top surface of the microscope slide. This allows the light to pass through the specimen from below and be magnified by the lenses in the microscope to form an image for observation.
When viewing a specimen under the microscope you should always start with what?
When viewing a specimen under the microscope, you should always start with the lowest magnification objective lens. This allows you to locate and focus on the specimen before moving to higher magnifications for a closer look.
When viewing a specimen under the microscope you should always start with the?
low power objective lens to locate and focus on the specimen before moving to higher magnifications.
When beginning to focus a microscope what lens should you use?
You should start by using the lowest power objective lens, usually the 4x or 10x objective, to locate and center the specimen on the slide. Once the specimen is in focus, you can switch to higher magnifications for more detailed viewing.
How should the condenser and diaphragm be adjusted for optimal viewing?
The condenser should be raised to the uppermost position. This maximizes the amount of light entering the objective lens and minimizes the amount lost to refraction. The diaphragm should be stopped down just enough to provide an acceptable image. The best results are usually obtained by beginning an examination on low power with the diaphragm almost completely closed.
What is the age of a Browning Highpower serial 76C32836 made in Belgium?
1976. You should call Browning. According to their web site that sn shouldn't exist
How should the condenser be set when viewing bacteria?
The condensor of microscope is used to control the light intensity so it first depends on the viewer and secondly it should be so adjusted so that the light intesity does not shoots high as it can damage the specimen and is also harmfull to the eyes and even to the microscope. It is also to be see that the specimen view clearly against its background.
What should you do before viewing a slide?
I would assume preview it before viewing it?
When observing a slide should the specimen be on the top or bottom surface of the microscope?
The specimen should be placed on the top surface of the microscope slide. This allows the light to pass through the specimen from below and be magnified by the lenses in the microscope to form an image for observation.
What should you do if a specimen spills on your clothes?
If a specimen spills on your clothes, you should immediately remove the contaminated clothing and wash the affected area with soap and water. Be sure to follow any specific handling instructions for the type of specimen involved and seek medical advice if needed.
What is the best viewing height for TV?
For optimum viewing, your eyes should be level with the middle of the screen when you're seated in your normal viewing position.
What power must be in first place a slide on a microscope stage?
The lowest power objective lens should be in place when placing a slide on a microscope stage. This allows for easier focusing and initial viewing of the specimen at a lower magnification before switching to higher magnifications.
What is the function of the stage adjustment knob?
The stage adjustment knob is used to move the stage horizontally or vertically to position the specimen under the objective lens for viewing. It helps in focusing the specimen and adjusting its position on the microscope slide.
