You use the low power objective lens first to get your sample centered in the field of view.
You should start focusing with the lowest magnification objective, typically the 4x objective. This allows you to locate and center your specimen before moving to higher magnifications.
Low power objective is like our eye if we want to see we can just see normally but if we want to see something very small but want to see properly at that particular part then we always go for some lens of something powerful. That's the same thing when we want to know something deeply we go for high power microscope to read a more detailed study of a particular part of object under the microscope.
The adjustment knob that moves the body tube for focusing with the high-power objective lens is called the fine focus adjustment knob. It allows for precise adjustments to bring the specimen into sharp focus at high magnifications.
The low power objective lens helps to first fine the specimen or object being viewed, and to focus the microscope. Once the lens power becomes higher it is much harder to focus the microscope and find the desired object of viewing.
A microscope should be stored with the lowest-power objective lens in place to prevent damage to the higher-power lenses. It is recommended to keep the 4x or 10x objective lens in place for storage as they are less delicate than the higher magnification lenses.
You should start focusing with the lowest magnification objective, typically the 4x objective. This allows you to locate and center your specimen before moving to higher magnifications.
Begin by using the lowest power objective lens and then switching to the next highest power lens.
10 times.
The lowest power of a microscope is typically 4x, known as the scanning objective lens.
The lower power objective is the lens on the microscope that gives you the lowest magnification. The exact magnification is 40x
Start with the lowest magnification objective lens, typically 4x or 5x, as it provides a wider field of view and makes it easier to locate the specimen.
The lowest possible magnification on a microscope is usually 40X. This is achieved with the lowest power objective lens combined with the lowest power eyepiece lens.
The lowest power objective lens should be in place when placing a slide on a microscope stage. This allows for easier focusing and initial viewing of the specimen at a lower magnification before switching to higher magnifications.
When focusing a microscope, you should start with the lowest power objective lens, typically the scanning objective (4x or 10x). This allows you to locate the specimen easily and focus without risking damage to the slide. Once the specimen is centered and in focus, you can switch to higher power objectives for more detailed viewing. Always use the coarse focus knob first, followed by the fine focus knob for precise adjustments.
lowest power, i think 40x
You typically start with the low-power objective lens and the coarse focus knob when focusing your microscope. This allows you to bring the specimen into view quickly and then fine-tune the focus using the high-power objective lens and the fine focus knob.
first view with low power then gradually increase the power. hope it helped you!