use somegoof-off or paint thinner or gasoline
Barnacles stick to the boat hull and grow creating a sort of skin over the hull. This in turn slows boat by taking away smoothness of hull and adding weight. Barnacles get knocked off and fall off , which pulls outer hull coating off allowing rot to get in.
pontoons and/or a boat-shaped hull.
scrapping them off
by a wet cloth soaked in salty water
The greatest risk of serious injury to a person in the water near a powerboat comes from the boat's propeller and hull. Propeller strikes can cause severe lacerations or fatalities, especially if someone is in the water while the boat is moving or if they fall off the boat. Additionally, being struck by the hull of the boat can lead to blunt force trauma. Other risks include entrapment and being thrown from the boat due to sudden maneuvers or rough waters.
An rc seaplane, or flying boat, is a remote control plane that can take off and land from water. The bottom of its fuselage is shaped like a boat hull to make it easy to navigate on a lake or pond.
simple green or castrol purple power cleaner
Yacht brush is one of boat cleaning kit, come to choose , we have to consider the brush head. if it is made of melamine mop, no cleaning agent required, no damage to fiberglass/glass/plastic or painted surfaces. Keep your boat as clean as new. This Yacht Brush from life nano has two wiping surfaces, bristles on one side and magic cleaning sponge on the other. the white melamine sponge with strong cleaning power head is suitable for polishing boat scratches, clean off dirt and imprints on the surface of ships without scratch, bright the hull as new. The bristles head can wipe off grease, mud and scum on the deck and hull, remove yellow waterline stains, rust stains or other stains or salt water that accumulate along the waterline .
Leeway is caused by the wind pushing against the side of a boat, which can create a sideways drift. This effect is influenced by factors such as wind speed, the boat's size and shape, and the angle of the sail. As the wind exerts force on the hull, it can cause the boat to move off its intended course, necessitating adjustments in steering to compensate for this drift. Additionally, the current and wave conditions can also contribute to leeway, further affecting the boat's trajectory.
A boat sinks when the hull no longer displaces the volume of water that equals the weight of the boat. Every sunken boat has its' own set of problems. There is not one way to that fits all. I raised one boat by removing the ballast weight, then pumping out the water when the gunnels all raised above the surface of the water. Another was towed to the waters edge at high tide then pumped out the water at low tide, (only about a three foot difference.) You might need to patch holes or turn off valves before you start. One way is to carefully provide flotation in the form of air bags spaced to lift the boat in an upright manner with straps. Bags placed in a compartment can brake through the deck. Straps on the hull if not wide enough can rupture the hull. Pumping water out of compartments in the wrong order can roll the vessel. Remember, The worst thing that can happen while trying to salvage a boat can be terrible.
Hull FC got their name Airlie Birds from the fact that their home ground was in Airlie Street, off the Boulevard in Hull.
suck that $hit dry hoe!