By measuring the exhaust housing, between the powerhead, and where the gearcase bolts on. A shortshaft engine will have an exhaust housing length of approximately 15 in. The longshaft engine will measure 20 in.
The 55es69c is a 1969 Johnson 55 hp Electro-Shift short shaft outboard. 55= Horse Power e = Electro-Shift s = Short Shaft 69= Year Manufactured c = Commercial
1979 short shaft 15 hp.
yes it can contact http://www.franzmarine.com/
No you can not but you can use a long shaft on a 16 inch transom
long shaft 28pounds, short shaft 27 pounds
The most common shaft length for engines in the 90 hp range is 20 in., refered to as a long shaft. They also come in 25 in., extra long, and for special applications, 15 in. refered to as a short shaft.
The 1988 Johnson 9.9 outboard model with the serial number J10RCCD is indeed a short shaft model. Typically, short shaft outboards have a shaft length of about 15 inches, while long shaft models are around 20 inches. You can confirm this by measuring the distance from the mounting bracket to the anti-cavitation plate.
The Johnson model JW-10, 3 hp, manufactured from 1952 - 1954, came in both short, and longshaft models. A measurement of the exhaust housing will identify which model you have.
mercury as well as most outboard manufactures have a number of different shaft lenths to fit different applications here is how you measure get a standard tape and measure up from the cavitation plate on the leg up to the bottom point on the powerhead, common lenths are 15" (short shaft) 20" (long shaft) and 25"(extra long) hope this helps
The 72 in the model number stands for 1972, the W stands for weedless, and the S means it's short shaft.
87 lbs for the short and long shafts..
A 5 hp Mariner outboard will do fine with a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.