To change the water pump on a 15HP Johnson outboard, first ensure the engine is off and cooled down. Remove the lower unit by unscrewing the bolts holding it in place, then disconnect the shift linkage. Take off the old water pump housing and impeller, clean the area, and install the new impeller and housing, ensuring proper alignment. Finally, reassemble the lower unit and test the pump for proper water flow.
70 LBS
Depending on the year model, a 15 hp Johnson outboard is listed as having a dry weight of 70 - 85 lbs.
50:1
50-1
It is the kill switch
i have a 15hp johnson with that same model number and it is a 1992
Once the water pump is removed, the shaft will slide out, the 15hp driveshaft is free floating,
The Johnson 15hp outboard motor with the model number AJ15BACDE was produced in 1995. Johnson outboard motors typically have a coding system that includes the year of manufacture within the model number. In this case, the "A" in the model number indicates the production year.
The 15 horsepower Mercury outboard motor does not have a water pump. The outboard motor is air cooled and does not have a need for circulating water.
No, you will certainly drown! Unless you want to start a new trend. Under water skiing.
50 to 1
The year of model #e15rlcde is 1986