0
Remove the starter (3 bolts) then you will see the shift rod under the carburetror. remove the screw connecting the shift rod. there are 5 bolts holding on the lower unit remove the bolts and the lower unit can be removed. then you cam remove the water pump housing and replace the impeller.
What else can I help you with?
How do you change impeller 5 hp evinrude 1998 2 stoke?
To change the impeller on a 1998 5 HP Evinrude 2-stroke outboard, first ensure the motor is off and disconnect the battery. Remove the lower unit by unscrewing the bolts and gently pulling it away from the engine, being careful not to damage the shift rod. Take off the water pump cover and remove the old impeller, then install the new impeller, ensuring it is oriented correctly. Reassemble the lower unit, making sure all seals are in place, and reconnect the battery before testing.
My 1998 mercury cougar is over heating I Changed out the thermostat but water is not flowing throuhout the engine this occurs mostly when driving the engine cools down when sitting and running?
possible fins/impeller blades on water pump are coroded away or impeller is come loose from water pump shaft. In a lot of racing applications we take a new water pump apart and weld the impeller to the shaft before installation
What could be causing your 1998 Audi A6 to over heat?
typical Audi problem. The water pump is stuffed. Impeller is free wheeling on its spindle. $$$
What is the fuel mixture for 1998 Evinrude 9.9 model E10RECC?
The 1998 model, 9.9 hp Evinrude outboard, will perform well on a 50:1 ratio. This is roughly, one pint of 2 cycle oil, to six gallons of fuel.
Why would a 1998 ford contour continue to overheat if the thermostat has been changed?
if it is a v6 it would be the notorious plastic impeller water pump...they crack off the shaft internally... Scuba
What is the fuel mixture for a 1998 90 hp evinrude?
You are looking at 50:1. Hope that helps.
Change water pump on 1998 dodge ram 2500 v-10?
How do I change a water pump on 1998 dodge ram v10 2500. I need a picture to
What does a 1998 88 hp evinrude engine weigh?
according to the dealer this engine weighs 288 lbs
How much does an 1998 evinrude 9.9 hp weigh?
As per the owners manual it weighs 109 lbs.{49kg}
How much does a 35 hp evinrude outboard weigh?
how tall is a 1998 evenrude 35 hp outboard motor
How long does changing the water pump on a 1998 dodge avenger take?
The average time it takes to change the water pump on a 1998 Dodge Avenger is six to ten hours.
Where is the water pump on a 3 liter V-6 1998 Dodge caravan?
behind the timing cover you should change the timing belt when you change water pump.
