answersLogoWhite

0

To fix water entering through the exhaust on a SportJet 200 HP, first, inspect the exhaust system for any cracks or damage that may allow water intrusion. Ensure that the exhaust pipes and connections are properly sealed and free of leaks. Additionally, check the exhaust flapper valve for proper operation; it should close tightly to prevent backflow of water. Finally, consider installing a water separator or check valve if the issue persists to further prevent water from entering the exhaust system.

User Avatar

AnswerBot

2w ago

What else can I help you with?

Related Questions

How do you stop a marine mercury bilge siphon pump allowing water in to the boat?

If your engine is a sportjet, it probably has a bilge siphon system that connects to the pump. If so, the siphon hose must be "looped" from the pump above the water line, then back down to the bilge. This should prevent water from backwashing through the hose into the bilge.


How does water enter a submarine?

Water enters the submarine by entering through the butthole and leaving from the propellers


What causes soot and water drips from exhaust?

That is called condensation. When you start the engine the exhaust system/pipes are cold. When the heat from the engine exhaust passes through the exhaust it makes it sweat. That is normal.


What does transom through hull exhaust mean?

The exhaust is expelled directly from the engine using straight pipes through the stern of the boat, above the water line. Normally high speed boats are equipped with these types if exhaust system.


What will blocked water box do to jet ski?

A blocked water box will prevent water from flowing into the exhaust system. Because jet skis have a fully-enclosed engine space, cooling of the exhaust system is vital to prevent overheating. With no cooling water flowing into the exhaust system, the exhaust system will overheat. Exactly what happens depends on the model and to some extent on luck. But usually one of the exhaust connections will burn through, causing exhaust to leak into the bilge.


What is the process of water entering the plant through the roots and evaporating through the leaves?

The processes are absorption by capillarity and transpiration.


What process leads to water entering an aquifer?

Percolation leads to water entering an aquifer.


Where does a stalactite form?

On a cave roof by precipitation of calcite from solution in water entering through a joint.


What is the purpose of the water box in a 1993 yamaha wave runner 3?

to keep the water from getting through the exhaust back to your motor.


What is the cause of water in the transmission?

Failed oil to water cooler ( usually antifreeze from the radiator ) Water entering through a seal, Dipstick, axle seal, etc Drove into deep water and it came in through the vent.


What is the term for water entering the body through skin?

The term for water entering the body through the skin is "transdermal absorption." This process allows certain substances, including water, to penetrate the skin barrier and enter the bloodstream. While the skin is generally a protective barrier, it can absorb some small molecules and compounds.


Most of the water entering the plant through the roots is?

Most of the water entering the plant through the roots is absorbed by the root hairs, which are tiny extensions on the root surface that greatly increase the root's surface area for absorption. This water is then transported up through the xylem tissue in the stems to reach the rest of the plant for various physiological processes.