If not using the oil injection system, a 150hp Mercury outboard would require a 50:1 ratio. This is roughly, one pint of 2 cycle oil, to six gallons of fuel.
The answer to this question is on web under (johnson vro50) type in search bar
If not using oil injection, the 80 hp Mercury outboard requires a 50:1 ratio, roughly one pint of 2 cycle oil to six gallons of fuel.
where is the drain oil plug on a 2010 9.9 mercury outboard motor
If not using the OEM oil injection system, the fuel to oil ratio for the Mercury 150hp XR4, is 50:1. This is roughly, one pint of 2 cycle oil, to six gallons of fuel.
you can't disconnect it! you will only need to pre-mix your gaz in your gaz thank and eventually your injector pump will burn out !
Use of a synthetic oil for the Suzuki DT50 outboard engine oil injection tank is recommended. A high quality 2T oil will provide maximum protection.
If running without oil injection, a 50:1 ratio is required, roughly one pint of 2 cycle oil, to six gallons of fuel.
what type oil to use on 4stroke 2.5mercury outboard
If not using oil injection, the 115 hp Yamaha outboard will require a 50:1 ratio.
I have a 1999 Mercury 2stroke 5HP outboard and the owners manual states 50:1 Gas/Oil mixture.
A 175hp Mercury outboard requires a 50:1 fuel to oil ratio.