answersLogoWhite

0

An motor can be connected to the side of a 55 gallon drum filled with water and run that way. Or you can purchase "ear muffs" at a marina. They attach to a garden hose. You put the muffs around the intake ports above the propeller, turn on the garden hose and wait to see if water comes out the exhaust port. If it does, you know you have the muffs in the right place. Then turn on your engine. Start it in neutral! If you put it in forward or reverse the prop will spin. Make sure nothing or no one is around the prop.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Land rover discovery 2 start motor?

my land rover discovery 2 i want know is fix is hard or easy


1993 Pontiac transport wiper motor not working?

chances its not the motor but the wiper module board located on the wiper motor. just remove the wiper motor and the module board is connected to it.


When was Estonian Land Board created?

Estonian Land Board was created in 1990.


Where is the pulse board on a 1998 Chevy s10 wiper motor?

It is attached directly to the wiper motor. Remove the three small screws that hold a black plastic cover on the wiper motor. The pulse board is under that cover. Most of your wiper motor problems are from a faulty pulse board.


What type of motor is the inducer motor?

A circuit board is the inducer motor. It runs off of 120 volts.


Did the titanic have any motor boats on board?

no


How do you replace the wiper motor pulse board on 1999 silverado 2500?

how do you replace the wiper motor pulse board on a 1999 Chevy Silverado 2500


How do you start single phase induction motor?

capacitive start motors start by themselves however a normal single phase induction motor requires a starter motor to 'kick-start' the motor into action.


Is there a air filter on a force outboard motor?

Is there a air filter for a force out board motor


Do dice have to land on board?

...No


How do you replace the wiper motor on 1998 Chevy S10?

I have found that most S10 (GM) wiper motor trouble is caused by a faulty pulse board, not the motor itself. It is easy to replace and your local auto parts store can sell you an aftermarket pulse board for aprox $20. The wiper motor does not have to be removed to change the pulse board. Unplug the wire harness from the motor, remove the three small screws holding the cover to expose the pulse board then wiggle the board straight out. Reverse order to install.


Who is the main antagonist in the board game Candy Land, known as the Candy Land villain?

The main antagonist in the board game Candy Land is known as Lord Licorice.