answersLogoWhite

0

It depends on what timber your joists are,how much water has been involved and for how long the water has been affecting the joists.Stop the egress of water and let the joists dry out.Take it from there.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How to run a cable underfloor from a wall socket?

Yes, as long as you do not run it under the floor joists. New electrical code requires that you drill a hole through the floor joists and run the wire through those holes. It cannot be hanging under the floor joists. If you see wires are already running under the floor joists then go ahead and run the wire under the joists attaching it on every other joists with a wire staple. Make sure they wire does not make contact with any metal ductwork or any other metal objects. Match the wire with what is already in the wall outlet you are jumping off of. If it is 12/2 then use 12/2, if it is 14/2 then use 14/2. Never mix wire gauges.


How long does water need to be on a laminate floor before damage occurs?

if the water is on the surface of the laminate: months. If the water finds its way to the substrate (at a joint or crack) then it depends on the substrate, it could cause damage in minutes or hours.


What is the cost to replace a rim joist?

In a typical home, the surface flooring (such as wood, carpet or vinyl) rests on a subfloor, which rests on joists -- a series of closely spaced parallel beams that support the floor or ceiling loads. Joists are usually supported by a sill (a long horizontal timber that's the lowest part of the framework and rests on the foundation) or a girder (a large beam that's the main support of the building). When replacing rotted floor joists it's important to be sure the girder and sill are still intact.Typical costs:If only a few joists are rotted primarily at the bottom, they can be repaired using a process known as "sistering" -- after the rot is cleaned away and the timber treated to prevent more problems, a new joist is laid beside the old one and fastened to it. Total costs will depend on the extent of the damage and the ease of access to the joists (through a basement or crawlspace), but in general sistering averages $100 -$300 or more per joist, and could run $1,000 -$3,000or more to repair a tilted, wavy or bouncy floor under an average room.If the floor joists are extensively damaged, it will be necessary to support the house with jacks while the joists are removed and replaced. In many cases, the sill may also be rotted and need replacing. Costs can run $10,000 -$30,000 or more for a typical home, depending on its size, the extent of the extent of the damage and the ease of access to install jacks and replace the timbers. If the damage is limited to just one section of floor joists, the project could run $5,000-$10,000.What should be included:Joists carry the weight of walls, furniture, people, appliances and anything else placed on the flooring they support. Usually wooden floor joists are 2"x8", 2"x10" or 2"x12" timbers -- their size depends on their length, the amount of "load" they're designed to carry and the building codes in effect when the house was constructed. The Family Handyman explains how joists work.If there is sufficient access through a basement or crawlspace, floor joists can be repaired or replaced without significant impact on the rest of the house. However, if there is limited access, all furniture and appliances must be removed from the affected area and the flooring and subfloor torn out. The Family Handyman explains how to "sister" damaged joists and HammerZone.com describes using a jack to raise a slightly sagging floor.Additional costs:Floor joists can be damaged by boring insects such as termites or extended exposure to water. Before you replace damaged floor joists, you must exterminate the insects or improve the drainage and ventilation so the problem won't reoccur. Costs will vary widely depending on the extent and nature of the original problem.Typically floor joists are repaired or replaced working from below, in a basement or crawl space. But if there's limited access to the joists, it may be necessary to work from above, removing the flooring and subflooring to repair or replace any damaged floor joists. Costs will depend on the extent of the damage and the type of replacement subflooring and flooring chosen.


How can I effectively waterproof a concrete floor to prevent water damage and ensure its long-term durability?

To effectively waterproof a concrete floor and prevent water damage, you can apply a concrete sealer or waterproofing coating. These products create a protective barrier that repels water and helps maintain the floor's durability over time. Make sure to thoroughly clean and prepare the surface before applying the waterproofing product for best results.


Water Damage Service?

form_title=Water Damage Service form_header=Have damage and stains left by water? Have the experts remove them! Where is the water damage located? =_ How long have you noticed the water damage? =_ What type of flooring do you have? =_ Do you believe the water damage is due to a septic tank leak?= () Yes () No () Unsure


What are the benefits of using water-proof floor tiles in a bathroom renovation project?

Water-proof floor tiles offer several benefits in a bathroom renovation project. They provide protection against water damage, are easy to clean and maintain, and can enhance the overall aesthetic of the space. Additionally, water-proof floor tiles are durable and long-lasting, making them a practical choice for a high-moisture environment like a bathroom.


What are the best materials to use for a shower floor liner to prevent water leakage and ensure durability?

The best materials to use for a shower floor liner to prevent water leakage and ensure durability are PVC or CPE liners. These materials are waterproof, resistant to mold and mildew, and provide a long-lasting barrier against water damage.


When do you need bridging in a floor?

Bridging is always a good idea. I did a little construction work a long time ago, and we always used thin metal strips between the joists in new construction instead of wooden bridge work. Here's a picture of metal bridging between joists. In this picture they have bridging every third of the way, or every 4' on a 12' floor. http://www.rd.com/familyhandyman/content/34459?trkid=tfhplus_november_07


What is the best floor for a kitchen?

The best flooring by far for a kitchen is ceramic tiles with an epoxy grout. They will last a long time won't take any water damage and increase your home value.


How can I effectively waterproof my basement floor to prevent water damage and ensure long-term durability?

To effectively waterproof your basement floor and prevent water damage, you can use a combination of sealants, waterproofing paints, and epoxy coatings. It is important to properly clean and prepare the surface before applying any waterproofing materials. Additionally, consider installing a sump pump or French drain system to help manage any excess water. Regular maintenance and inspections are also key to ensuring long-term durability.


How can I effectively waterproof my shower floor to prevent water damage and ensure long-lasting durability?

To effectively waterproof your shower floor and prevent water damage, you can use a waterproofing membrane or sealant specifically designed for showers. Make sure to properly prepare the surface, apply the waterproofing material according to the manufacturer's instructions, and ensure proper sealing around drains and corners. Regular maintenance and reapplication of the waterproofing material can help ensure long-lasting durability.


How to install flashing on a deck to prevent water damage and ensure long-term durability?

To install flashing on a deck, start by attaching a metal flashing strip to the ledger board where the deck meets the house. Make sure the flashing extends down over the top of the ledger board and out over the deck joists. Secure the flashing with screws or nails. Next, install a second layer of flashing over the top of the ledger board and under the siding of the house. This will help direct water away from the house and prevent water damage. Finally, seal any gaps or seams in the flashing with caulk to ensure a watertight seal. This will help prevent water damage and ensure the long-term durability of your deck.