how low does oil level have to be before oil light activates on a Suzuki 70 horsepower outboard motor
Before you remove the flywheel key on a Suzuki 115 hp outboard motor you need to make sure you disconnect the sparkplugs and remove the flywheel nut. Then, you will need a tool to keep the wheel stationary as well as a lobe wheel peeler.
Yes, you can typically mount a small outboard engine, ranging from 2 to 8 horsepower, on a small plastic pontoon boat like a Pond Prowler, provided that the boat is designed for motorization and has a proper transom for engine attachment. It's important to ensure that the weight and power of the engine are appropriate for the boat's size and capacity to maintain stability and safety. Always consult the manufacturer's guidelines for maximum horsepower and weight limits before proceeding.
Brake horsepower is the hvac motor horsepower before the motor hp is dropped due to a load. Indicated, gross and SAE are other ways to rate horsepower.
Horsepower to the crank refers to the power output of the engine before it reaches the drivetrain, while horsepower to the wheel is the power that is actually transmitted to the wheels after losses in the drivetrain. Horsepower to the wheel is typically lower than to the crank due to power losses from the transmission, differential, and other components.
The engine will line up, you might be able to fabricate some engine mounts and make it work. I would check with my Suzuki shop and ask them before attempting such a chore.
Brake Horsepower doesn't "do" anything, it's a rating of the engine's power before any parasitic loads (alternator, transmission, water pump, etc.) are added.
If it was running before falling over, the carb if flooded.
You need to know the voltage as well before the conversion can be made.
Up to 15bhp if under 21, after that its up to 33bhp before passing your test.
If the first digit in this serial number is possibly "A", instead of 4, this would be a 1987 year model 8hp. I do not recall the 8hp model Mercury outboard in production before the A model, in 1986.
Japan.
The Yamaha outboard thermostat must be exposed in order to be changed. Removing the T cover by unfastening the two bolts will expose the thermostat. Before removing it, look for any debris or damage that needs repair. Lift out the thermostat and replace it.