answersLogoWhite

0

CLass 1 Class 2 class 3

16-26ft 26 ft-40 ft 40ft-65ft

1 B1 2 b1 or 1 b2 3 b1 or 1 b1 and 1 B2

Im taking a boating class currently

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How many B1 fire extinguishers must motorboats between 26 feet and 40 feet have aboard?

two


How many b1 fire extinguishers must be motorboats between 26 and 40 feet have aboard?

2


How many B1 and fire extinguishers must motorboats between 26 and 40 feet have aboard?

two


How many B1 fire extinguishers must motorboats between 26 adn 40 feet have aboard?

Two


How many b1 fire extinguishers must aboard motorboats between 26 and 40 feet have aboard?

1-2


How many B1 fire extiguisher must motorboats between 26 and 40 feet have aboard?

Motorboats that are between 26 and 40 feet in length are required to have at least one B-1 type fire extinguisher on board. If the boat has an enclosed engine compartment, it must carry at least two B-1 extinguishers. It's essential to ensure that these extinguishers are easily accessible and in good working condition for safety compliance.


How many B1 fire extinguishers for motorboat 26 to 40 feet long?

Two 2-pound dry chemical extinguishers, or other approved B-I extinguishers.According to US Coast Guard regulations for motorboats, 46 CFR 25.30:Motorboats at least 26 but under 40 feet: two B-I extinguishers, or only one, if there is a fixed-type extinguisher in the machinery area.


Why type of fire extinguisher is need on a boat less than 26 feet?

At least one USCG-approved Class B-1 fire extinguisher is required on any powerboat, unless it is under the following exception:"motorboats less than 26 feet in length,propelled by outboard motors andnot carrying passengers for hire, need not carry such portable fire extinguishers ifthe construction of such motorboats will not permit the entrapment of explosive or flammable gases or vapors" [bullets added]A UL-listed 5-B:C extinguisher, with 2 pounds of dry chemical, may provide the basis for the extinguisher, but it must ALSO conform to USCG-approvals (proper corrosion protection, labeling, mounting bracket, etc).


How many fire extinguishers are required on an 18 feet boat with installed fuel tanks?

At least one USCG-approved Class B-1 fire extinguisher is required on any powerboat, unless it is under the following exception:"motorboats less than 26 feet in length,propelled by outboard motors andnot carrying passengers for hire, need not carry such portable fire extinguishers ifthe construction of such motorboats will not permit the entrapment of explosive or flammable gases or vapors" [bullets added]A UL-listed 5-B:C extinguisher, with 2 pounds of dry chemical, may provide the basis for the extinguisher, but it must ALSO conform to USCG-approvals (proper corrosion protection, labeling, mounting bracket, etc).


What boats require a type B fire extinguisher?

A blowup boat that you tie to your real boat too to lay out in the sun, or have some mommy time with a little one that is scared of the water just yet.Under US Coast Guard regulations: Boats under 26 feet, with only outboard motors, with "the construction of such motorboats will not permit the entrapment of explosive or flammable gases or vapors", and with no passengers for hire, does not need ANY fire extinguishers (but why not have one anyway?).kayak


How far is 15 feet from a fire hydrant?

Fifteen feet from a fire hydrant is fifteen feet from a fire hydrant.. Just the same as fifteen feet from the fence..


What boat a type b fire extinguisher?

At least one USCG-approved Class B-1 fire extinguisher is required on any powerboat, unless it is under the following exception:"motorboats less than 26 feet in length,propelled by outboard motors andnot carrying passengers for hire, need not carry such portable fire extinguishers ifthe construction of such motorboats will not permit the entrapment of explosive or flammable gases or vapors" [bullets added]A UL-listed 5-B:C extinguisher, with 2 pounds of dry chemical, may provide the basis for the extinguisher, but it must ALSO conform to USCG-approvals (proper corrosion protection, labeling, mounting bracket, etc).