0
What else can I help you with?
What is the Weight of 1986 mercury 50 hp outboard motor?
190lbs. No Trim/tilt. Dry.
What does ELPT mean on a 50hp Mercury 4 stroke outboard?
ELPT on a 50hp Mercury 4-stroke outboard stands for "Electric Start, Long Shaft, Power Trim." This designation indicates that the outboard features an electric starting system, a longer shaft length suitable for larger boats, and a power trim feature that allows for easy adjustment of the motor's angle while underway. These features enhance the convenience and performance of the outboard in various boating conditions.
What is a mercury force 40 hp outboard worth 98?
Depending on condition. does it have tilt and trim, are the throttle controls with etc .. between 600-1000 If in good condition. Hope this helps
Why your 1998 115 hp mercury out motor want turn over at all?
it is a mercury 115 brown strip. battery has 12.6 volts solinoid starts motor if you jump accross it has no power to controller tilt trim thumb control or switch.
My Mercruiser Alpha One has separate trim and tilt buttons on the throttle do these both do the same thing As far as I can tell they both just move the trim up and down?
When wired correctly, the smaller trim buttons are designed to operate through the trim cycle only. The larger tilt / trailer button is used to tilt the outdrive up, for clearance when trailering the boat.
Can you tell what year a 50 hp Johnson motor model j50pleea is?
I have the same motor. Johnson - 50hp - Power tilt & trim - 20 in. shaft - 9 - 9 - Model suffix The ee is the two digit year '99 I have this motor too-it was 99 model year and mine was manufactured in June 1998.
Will a tilt and trim from a 1978 evinrude 70 hp fit a 1985 evinrude 60 hp?
I did some looking into this and found two things. First, OMC seems to have never changed the design of the tilt trim system from year to year. It worked, so why try fixing it? The second is, the same tilt trim is used on 60 thru 115 horse motors. So yes, the tilt trim from your old 70 hp motor will fit your new 60 hp one.
What is the weight of a 1982 50 HP Mercury Outboard Motor?
The weight of a 1979 70 HP Mercury outboard with 20 inch shaft, power tilt and trim is 239 pounds. I would expect the somewhat newer motor to weigh about 5-10 pounds more. Hope this helps.
Can you use sea star hydraulic steering fluid for tilt trim?
It's not recommended to use Sea Star hydraulic steering fluid for tilt trim systems, as they are designed for different purposes and may have different chemical compositions. Using the wrong fluid can lead to equipment damage or reduced performance. Always refer to the manufacturer's guidelines for the appropriate fluid type for your specific tilt trim system.
What features does the 94 jetta have?
The GL trim comes standard with these features. - Power locks - Tilt wheel - AM/FM stereo The GLS trim comes standard with these features. - Power windows - Cruse control - Tilt wheel - AM/FM stereo - Cassette The GLX trim comes standard with these features. - Power locks - Power windows - Tilt wheel - AM/FM stereo - Cassette - Dual front air bags - Leather - Alloy wheels
What year is evinrude with a model number E120TLESB?
This is a 1990 120Hp motor with Electric start, Tilt & Trim.
How much does a 50 hp mercury outboard weigh?
It depends on the year. The 3 cylinder models made in the 2000s are 204 lbs with power trim and tilt. The older classic 4 cylinder models are about 175 lbs. Check NADA outboards for exact model. www.nadaguides.com
