0
To bond to old fiberglass boat hulls--say to install a tunnel--what is the best way to bond?
make a template for the desired shape and width of the tunnel, draw it out on a heavy type brown paper of very thin luan. just remember you can draw half of the shape then flip it as to insure everything is the same on both side of the center line of the boat. make sure you make a mark on the forward and aft of the template dead center. to find centerline of the boat measure from chine to chine make the marks and line up the template of your tunnel. then using 4 in high speed grinder and a cuttting wheel cut it out, dont worry about stringers and such at this point. main thing is to see what you have to work with when the glass is cut. ie where you will need to cut the floor to have access to your inside laminations and new stringer work. there are alot of steps involved after that but nothing very hard to do!
What else can I help you with?
What is the best adhesive to install a soap dispenser in a fiberglass shower unit?
Liquid Nails
What insulation is best for attics?
Loose fill (usually fiberglass or cellulose) or batt insulation (usually fiberglass) are both good insulations for attics. Batts are better for do it yourselfers, but loose fill is cheaper to install when using a contractor.
What is the best insulation to use for 2x4 exterior walls?
The best insulation for 2x4 exterior walls is typically fiberglass batt insulation. It is cost-effective, easy to install, and provides good thermal performance.
What liner material is best for an underground pool fiberglass or concrete?
Fiberglass. Over time concrete stains and can become rough, where fiberglass retains its smooth texture. Fiberglass will also give you more options.
What is the best insulation for a shed?
The best insulation for a shed is typically foam board insulation or fiberglass insulation. Foam board insulation is easy to install and provides good thermal resistance, while fiberglass insulation is cost-effective and offers good insulation properties. Both options can help regulate temperature and reduce energy costs in a shed.
What are the best methods for repairing a fiberglass bathtub crack using a fiberglass bathtub crack repair kit?
To repair a fiberglass bathtub crack using a fiberglass bathtub crack repair kit, the best methods typically involve cleaning the area, applying the repair compound, and sanding and painting the surface for a seamless finish. Follow the instructions provided in the repair kit for best results.
What cleaning supplies should be used on a fiberglass boat?
A sponge and some fiberglass sealers works the best on a fiberglass boat. There are other fiberglass cleaning material available depending on what your particular need is. For just basic cleaning, I would go with the sponge and fiberglass sealer.
What are the best techniques for painting a fiberglass bathtub with fiberglass bathtub paint?
The best techniques for painting a fiberglass bathtub with fiberglass bathtub paint involve thorough cleaning, sanding the surface for better adhesion, applying a primer specifically designed for fiberglass, and using a high-quality paint made for fiberglass surfaces. It is important to follow the manufacturer's instructions carefully and allow sufficient drying time between coats for a durable and long-lasting finish.
Where can I purchase a fiberglass column?
www.columns.net may be your best choice.
What material acts as the best insulator wood shavings fiberglass solid wood concrete?
Fiberglass is known to be the best insulating material among the options listed. It has a high R-value, which indicates its ability to resist heat flow effectively. Wood shavings, solid wood, and concrete have lower insulating properties compared to fiberglass.
Where can I buy a cheap Fiberglass Tank for pressurewashing?
www.tank-depot.com offers the best prices online for buying a Fiberglass Tank for pressure washing.
Can you paint a fiberglass tub?
Yes, you can paint a fiberglass tub using a special type of paint designed for use on fiberglass surfaces. It is important to properly prepare the surface and follow the manufacturer's instructions for best results.
