answersLogoWhite

0

If it has no pressure your problem should be on the pump. The three things I'd recommend you to check are: Packings, Unloader and Valve Kit.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What do you use in your Pressure washer?

Water.


Can you use a water butt to supply a pressure washer?

Yes, you can use a water butt to supply a pressure washer, but it may require a pump to maintain adequate water pressure. Most pressure washers need a minimum water pressure to operate effectively, which a gravity-fed system from a water butt may not provide unless it's elevated. Additionally, ensure that the water butt is clean to avoid clogging the pressure washer's filter and nozzle.


How long of a water hose can you use on a pressure washer?

The maximum length of a water hose you can use on a pressure washer typically ranges from 50 to 100 feet, depending on the pressure washer's specifications and the diameter of the hose. A longer hose can reduce water pressure, so it's essential to use a high-quality, larger diameter hose to minimize pressure loss. Always check the manufacturer's guidelines for your specific pressure washer model to ensure optimal performance.


What type of pressure washer hose fitting should I use for optimal performance and compatibility with my pressure washer?

For optimal performance and compatibility with your pressure washer, use a hose fitting that matches the size and type recommended by the manufacturer of your pressure washer. This will ensure a secure connection and efficient water flow during operation.


What is the best way to connect a pressure washer connector to a garden hose?

The best way to connect a pressure washer connector to a garden hose is to first ensure both the pressure washer and garden hose are turned off. Then, attach the pressure washer connector to the garden hose by screwing it on securely. Finally, turn on the water supply and check for any leaks before using the pressure washer.


Is the amount of pressure in a gas powered pressure washer dependent on home water pressure?

No, it most cases it it the GPM demand


What is a pressure washer?

Basically, a pressure washer uses pressurization to deliver a concentrated spray of water or liquid. The force of this stream enables you to deep clean surfaces. But be careful what you use a pressure cleaner on - the force of the water can harm some surfaces. A pressure washer is a machine that pressurizes enough pressure to blast out a forceful spray of water that can deep clean an area and rid it of grime and mold. Pressure washers are used by painters to peel away paint from a house.


What is the GPM (gallons per minute) of water flow for a pressure washer?

The GPM (gallons per minute) of water flow for a pressure washer typically ranges from 1.5 to 4 GPM, depending on the model and size of the machine.


Pressure Washer Reviews?

form_title= Pressure Washer Reviews form_header= Keep your home clean with the best pressure washer. What is your budget for a pressure washer?*= _ [50] Do you want to rent or buy a pressure washer?*= () Buy () Rent What is the square footage of your home?*= _ [50]


Why after the hot water in the kitchen heats up the pressure goes out and trickles the hot water?

As the water heats up the washer in the tap, it expands. This causes the washer to partially block the open valve.


How does a pressure washer pump work to generate high-pressure water for cleaning tasks?

A pressure washer pump works by using a motor or engine to drive a piston or impeller, which pressurizes water from a hose. The pressurized water is then forced through a nozzle at high speed, creating a powerful stream of water that can effectively clean surfaces.


Who invented the pressure washer?

Rehano and Carolyn Harold Were the creators of the pressure washer.