0
What else can I help you with?
Where do you find the oil in a 1961 Johnson 40 hp?
It is a 2 stroke so it is in the gas and the lower unit has gear lube in it which can be checked by removing the upper plug on the side of the unit.
Information on geer oil for a Johnson 65 hp?
If your engine has electric shift, a special gear lube is required. If it is a mechanical shift, ordinary hypoid 90 will work. Seems the special lube was called premium blend, but I could be wrong about the name. I would give a quick call to a Johnson dealer to verify availability of the special lube if needed.
Can you use Quicksilver high performance gear lube in a 40 hp Honda outboard lower unit?
The Quicksilver high performance lube will work perfectly fine in a 40 hp Honda. This lube was formulated for use in larger, high demand gearcases and outdrives. The only precaution to note is not to mix this lube with other types of gear lubricant.
1970 60 hp Johnson boat motor gas oil ratio?
The 1970 model, 60 hp Johnson outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.
How many kilograms does a 1970 40hp Johnson outboard motor weigh?
1970 40 HP Johnston outboard weighs 145 lbs.
How much gear oil is in a Johnson 150 hp?
The Johnson 150 hp outboard motor typically requires about 2 quarts of gear oil for its lower unit. However, it's essential to consult the specific owner's manual for your model, as capacities can vary slightly based on the year and specific configuration. Always ensure to use the recommended type of gear oil for optimal performance and longevity.
What kind of gear oil does a 1980 mercury 80hp outboard need?
For the 80 hp Mercury, you may use any brand of gear oil that has been blended for use as an outboard motor gear lube. There are many brands available other than oem, and are specially formulated for outboard use.
How do you change gears in a Johnson 50 hp?
how do you get to the gears on a johnson 50 hp marine
What is the oil capacity for lower unit 1985 90 hp Johnson?
The oil capacity for the lower unit of a 1985 90 hp Johnson outboard motor is approximately 24 ounces (or 0.75 liters) of gear oil. It's important to use the appropriate type of gear oil recommended by the manufacturer, typically a high-quality marine gear oil. Always ensure the lower unit is properly filled and check for any leaks after servicing.
What sould the consistancy of lower unit oil in a Mercruiser 150 hp be?
Mercury Premium gear lube is caramel-clear in color. It should be changed every year or 100 hours of use. If it gets old and smelly it should be changed. If you see white streaks you have water leaking in through a bad seal. Mercury High performance Gear lube is blue/green-clear. See more at sterndrives.com
What is the point gap for a 50 hp Johnson outboard?
The point gap for the 50 hp Johnson outboard is set at .020".
What is the weight of a 20hp Johnson outboard?
what is the weight of a 15 hp johnson
