Mixture ratio of gasoline and "2-stroke outboard oil". 1 part of oil for every 50 parts of gas. It's much easier to just read the label on the oil container. There are markings for the exact amount to use.
FYI: 2-stroke motors do not have oil like automobiles. They get their oil from this mix. The motor can be damaged if not properly mixed.
50:1
Fuel /oil mix is 50:1
To create a 50:1 gas mix for 5 gallons of gasoline, you would need to use 5 gallons of gas and mix in the appropriate amount of oil. Since 50:1 means 50 parts gas to 1 part oil, you divide 5 gallons (which is 640 ounces) by 50, giving you 12.8 ounces of oil. Therefore, for a 50:1 mixture, you would mix 5 gallons of gasoline with 12.8 ounces of oil.
50:1
50:1
To create a 50 to 1 oil to gas mix, you would need to use 50 parts gasoline to 1 part oil. For every gallon of gas (128 ounces), you would divide that by 50, which equals approximately 2.56 ounces of oil. Therefore, for one gallon of gas, you would mix in about 2.56 ounces of oil to achieve the desired ratio.
50:1 or 1 gallon gas to 2.6 oz. oil
To achieve a 50:1 oil to gas mix with 6 gallons of gas, you need to calculate the amount of oil required. For every 50 parts of gas, there is 1 part of oil, so for 6 gallons of gas, you would divide 6 by 50. This equals 0.12 gallons of oil, or approximately 1.5 cups. Thus, you would mix 6 gallons of gas with about 0.12 gallons (or 1.5 cups) of oil.
2.5 Ounces it say the mix rate on all 2 stoke oil containers. Add the oil then the gas to get a good mix.
Fuel /oil mix is 50:1
You pour the cycle oil into the gas can and then fill it with gas to mix it. 50 to 1 refers to the ratio of gas to oil.5 parts of gasoline to 1 part of oil.
50:1