I paint boats for a living, and for me, nothing beats AWLGRIP 2000 topcoat over AWLGRIP 545 epoxy undercoat. It's a bit expensive, but long lasting, great to apply, and can be easily repaired and polished.
The topside watch will be charged with the comings and goings on the topside of the submarine (called a boat by those who sail on them) when the boat is tied to a pier or tender. There may be an officer of the deck there on some occasions, but when the boat is lying along side a tender or the dock of a submarine or naval base, security is such that the topside watch will be the lone crew member on the deck.
Fibreglass is best painted with a two part (twin pack) polyurethane paint.
Yes, you can paint a boat in The Blockheads. To do this, you need to craft a paint bucket and gather the desired dye from flowers or other sources. Once you have the paint, simply tap on the boat with the paint bucket to apply the color. This allows you to customize the appearance of your boat to match your style.
A large marine supply retailer is the best source of boat paint. If the shop doesn't have a full line of the paint, it should be able to show you color chips and place an order. Some home improvement stores carry marine paint as well. Your question does not include a location, so it is not possible to direct you to local resources.
poo on it
In 1881.
you can not paint a plane or boat in saints row 2 or 3
The topside should be the strongest because it is has the sharpest curvature. The topside is more domed shaped than the sides, so the topside is stronger.
1956
Using muriatic acid on a fiberglass boat is not recommended as it can damage the surface. It's best to use a cleaner specifically designed for fiberglass to remove paint stains. Test a small, inconspicuous area first before proceeding with the entire stain.
Yes, Boat covers really do protect your boat. They have a soft felt liner on the inside that keeps the rougher, outer protection layer from scratching the paint of the boat.
If boat has paint that is in good shape and you just want to change color, sand area with 400 to 600 grit then wipe clean with acetone,lacquer thinner or similar solvent then paint. If Paint is in bad shape strip chemically or sand to remove paint. Sand to 400 grit then you must use a etching primer then paint. It is not recommended that you paint below waterline.