The cylinder compression on a 1985 Evinrude 25 HP motor typically ranges between 90 to 120 psi. It's important to ensure that both cylinders have similar compression readings for optimal performance. If the readings are significantly lower, it may indicate issues such as worn piston rings or cylinder wear. Regular maintenance and compression testing can help ensure the engine is functioning properly.
The Evinrude VRO 70hp outboard motor model E70ELCO was made in 1985. Evinrude was founded in 1907 by Ole Evinrude.
A 40 hp Evinrude, model number E40TELCO, is a 1985 year model.
A 70 hp Evinrude outboard, model number E70ELCO, would be a 1985 year model.
Probally around 100 pounds. Put it on a scale and weigh it :P
The dry weight of the 1985 model, 70 hp Evinrude outboard is 257 lbs.
I just purchased one of these and according to the Marine Dealer that sold it to me it is an 1985 9.9 HP.
An Evinrude 25hp outboard, 1985 year model, requires a 50:1 fuel, to 2 cycle oil ratio. This is roughly one pint of 2 cycle oil, to six gallons of fuel.
A good 454 will have at least 150 PSI per cylinder.
no 84 and 85 swap out.
Yes I have one on mine. A smaller Squish band and a little more compression too.
nope, the 85-86 motor is angled, the 87-92 are not. and the cylinder mapping is different as well.
0.8mm or 0.030 US