The 1996 Mercury Force 120 HP outboard motor weighs approximately 385 pounds (175 kg). This weight can vary slightly depending on specific configurations and additional features. It's important to check the manufacturer's specifications for the exact model you have for the most accurate information.
The 120 hp, Force outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.
625 amps - I just had to replace mine
50 to 1 i pint of oil for 6 gallons of gas
The 1998 model, 40 hp Mercury Force outboard requires a 50:1 ratio, one pint of 2 cycle oil to six gallons of fuel.
50:1
50:1
I have a Force 70 HP from 1993 and it's 50:1
The gas/oil mix for a Force 50hp outboard is 1:50
By 1996, Force outboards had been acquired by Mercury Marine. The 1996 models used a Chrysler / Force powerhead, carburetor, and mid section. The ignition system and the lower unit were of Mercury design, as were most of the trim units.
Depends on what you mean by service it? Change spark plugs, change lower unit oil, change impeller & thermostat, check 20 amp fuse, FULL decard, compression check, etc.....
50:1