The 1998 commercial model, 25 hp Johnson outboard operates on a 50:1 ratio. This is roughly one pint of 2 cycle oil, to six gallons of fuel.
100:1
The dry weight of a 1998 model, 15 hp Johnson outboard is 74 - 114 lbs, depending on the particular model in question.
70 kg
The 1998 model, 60 hp Johnson outboard runs a plug gap of .030 in.
The 98 model, 70 hp Johnson 2 stroke outboard, requires a .030 plug gap.
The 1998 model, 40 hp Mercury Force outboard requires a 50:1 ratio, one pint of 2 cycle oil to six gallons of fuel.
The 1998 model Mariner outboards use a 50:1 ratio.
The weight of a 1998 90hp Johnson SPL outboard motor is approximately 280 pounds (127 kg). This weight can vary slightly depending on specific configurations or additional equipment. Always refer to the manufacturer's specifications for the most accurate information.
A 1998 model 4hp Merc outboard runs on a 50:1 fuel to oil ratio. This works out to roughly one pint of 2cycle oil to six gallons of fuel.
The 1998 model, 9.9 hp Evinrude outboard, will perform well on a 50:1 ratio. This is roughly, one pint of 2 cycle oil, to six gallons of fuel.
The required fuel/oil ratio for the 98 model, 25 hp Mercury outboard is 50:1. This is roughly one pint of 2 cycle oil, to six gallons of fuel.
how tall is a 1998 evenrude 35 hp outboard motor