50 to 1, using a quality full synthetic oil like Stihl Ultra. Don't skimp on oil. Use the best.
jonsered oil/gas mixture ratio is 50 to 1.
The 451 is a 25:1 mix or 5.12 oz of oil to a gal of gas.
what is the oil gas mixture for a ysr50
its 40:1. Check the specs for this saw at: http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/801048d6175e831988256b6b00189180?OpenDocument
The Jonsered C Ss2238S chainsaw typically uses a fuel mixture of 50:1, which means 50 parts gasoline to 1 part two-stroke oil. It's important to use high-quality, properly formulated two-stroke oil to ensure optimal performance and reduce emissions. Always check the user manual for any specific recommendations or variations for your model.
Oil gas is a mixture, not a compound.
The Jonsered 451E chainsaw typically requires a fuel-to-oil mixture of 50:1. This means you should mix 2.6 ounces (or 75 mL) of 2-stroke engine oil with 1 gallon (or 3.8 liters) of high-quality gasoline. Always use a good quality, high-octane gasoline and ensure the oil is specifically designed for air-cooled two-stroke engines for optimal performance.
You need the mixture of gas and oil mixture for 2004 YZ 125 in the ratio 1:32.
The Jonsered 930 chainsaw typically requires a fuel mixture of 50:1, meaning 50 parts gasoline to 1 part two-stroke oil. This equates to 2.6 ounces of oil per gallon of gasoline. Always check the owner's manual for specific recommendations, as ratios can vary slightly between models.
50;1 = 2% mixture
32:1 gas to oil mixture
The gas oil mixture for that sled is 24:1 according to the tag on my 79 srx.