If there is no oil tank on the engine, the oil must be added to the fuel.
To mix gas and oil for a 1985 Force 125 hp boat motor, use a 50:1 ratio, which means mixing 2.5 ounces of 2-stroke oil for every gallon of gasoline. Ensure you use high-quality 2-stroke oil that is suitable for marine engines. Mix the oil and gas in a clean container before filling the fuel tank to ensure proper blending. Always double-check your owner’s manual for any specific recommendations or adjustments based on your motor's condition.
50:1 is fine, ive had no probs wiv mine Kev
yes but they are a problematic motor
125 is the least
The Honda 125 is not bigger than a Honda 230 4 Stroke if the only difference is the size of the motor. The Honda 125 is actually a taller motorcycle than the Honda 230 4 Stroke when size is considered in inches from the ground to the seat.
a cr 125 is a 2 stroke
50:1
Under the seat there is the tank for the oil, with a cap on saying Motor Oil
yes but the honda cr 125 is a 2 stroke
i use motul fully synthetic factory line 2 stroke oil in my kx 125.putting 25 ml to every litre.
The stator assembly on the 125 hp Force outboard provides both voltage for the ignition system, and charging system. The stator is located under the flywheel.
The mixture would be 20 to 1 for a Honda 125 2 stroke