0
What else can I help you with?
Do you need to drain the lower unit gear oil on an outboard motor when replacing water pump?
The gearcase assembly on an outboard engine is sealed, and draining is not needed. If however, the gear lube has not been changed in a while, during the water pump replacement is generally a good time to do so.
What kind of gear oil does a 1980 mercury 80hp outboard need?
For the 80 hp Mercury, you may use any brand of gear oil that has been blended for use as an outboard motor gear lube. There are many brands available other than oem, and are specially formulated for outboard use.
What is the amount of gear oil in lower unit on a 1973 7.5 hp mercury outboard?
The 1973 model, 7.5 hp Mercury outboard, requires 6.8 oz. of gear oil.
What type of gear oil do you use for Mercury 5hp outboard?
The 5 hp Mercury outboard requires no special type gear oil. General recommendation is for a GL-5 class lubricant, i.e. hypoid 90w. Most any of the oem, or aftermarket gear lubes, manufactured for outboard use, will work just fine.
Mercury outboard motor start and idles but stalls when you put in gear.?
outboard motor will start and idle, but dies out under load
What does p0731 mean on a Chrysler 300?
Incorrect gear ratio in first gear.Incorrect gear ratio in first gear.
What kind of gear oil does a sears gamefisher 1.2hp outboard use?
my manual says, sae 90 outboard motor grease, hope i helped
What is the diagnostic code P0731 for a 1998 Chrysler Concorde?
Gear ratio error in first gear.
What type of lower unit gear lube for 90hp mercury two stroke outboard?
For a 90hp Mercury two-stroke outboard, you should use a high-quality lower unit gear lube specifically designed for outboard motors. Mercury recommends using their own brand of gear lube, such as Mercury High-Performance Gear Lube or Quicksilver Gear Lube, which offer excellent protection against wear and corrosion. Always check the owner's manual for specific recommendations regarding viscosity and any additional requirements.
Why does the diesel car vibrate violently when idling or when reverse gear is engaged?
Possibly due to engine mount
How much gear oil goes in a 125 hp mercury outboard?
22.5 fluid ounces (or 666 ml's) per our 1994 Mercury 125 outboard manual.
What type of oil do you use in mercury outboard lower unit?
If the horsepower of your Mercury outboard lower unit is 75 and below, SAE 80W90 Gear Lube is recommended.
