Your Yamaha Wave Venture 1100 may be getting hot due to several reasons, including insufficient cooling water flow, a clogged cooling system, or a malfunctioning water pump. Additionally, overheating can result from a dirty or damaged impeller, low oil levels, or engine misalignment. It's essential to inspect these components and ensure proper maintenance to avoid overheating issues. If the problem persists, consulting a professional mechanic is advisable.
Your solenoid is bad.
To winterize a 1997 Yamaha 1100 Wave Venture, start by thoroughly cleaning the watercraft and removing any debris. Next, drain the fuel tank and add a fuel stabilizer to the remaining fuel to prevent degradation. Change the oil and filter, and flush the cooling system with fresh water. Finally, remove the battery, store it in a cool, dry place, and cover the watercraft to protect it from the elements.
The 1996 Yamaha Wave Venture 1100 has a fuel capacity of approximately 15.9 gallons (60 liters). In comparison, the 1996 Kawasaki 1000 ZXI jet ski has a fuel capacity of around 12.5 gallons (47.3 liters). These capacities allow for extended riding time on the water, but always check the owner's manual for specific details.
To fix the speed sensor on a Yamaha Wave Venture 1100, first, locate the speed sensor, typically found near the jet pump. Inspect the wiring for any damage or corrosion and ensure all connections are secure. If the sensor is faulty, you may need to replace it; this involves disconnecting the old sensor, installing the new one, and reconnecting the wiring. Finally, test the PWC to ensure the speedometer is functioning correctly.
13.2 gallons
50:1 ratio
Under the engine compartment seat, hook to cylinder head flush kit.
Yamaha Wave Blaster was created in 1993.
to keep the water from getting through the exhaust back to your motor.
To install a flush kit on a 1996 Yamaha Wave Venture, locate the flush kit fitting, typically installed on the cooling system's water intake. This fitting should be installed in a convenient location on the hull, often near the jet pump. Ensure that it is securely attached and that any hoses are properly connected to allow for effective flushing of the engine. Always refer to the specific installation instructions provided with the flush kit for optimal placement and installation details.
Honda wave 125i
Yamaha lc135 : more speed, and much more comfortable when compared with the Honda wave 125. i rode a wave 125 for like 4 years and the comfort which comes with the mono-shock on the Yamaha is unbeatable.. besides.. the Yamaha looks way cooler than the Honda. :)