Yes, water cools your engine. A water pump draws water from the radiator and into pores in the engine block, cooling it off. There is a thermostat that lets the hot water out of he engine at a certain temperature so the hot water cools off in the radiator with wind and the cold water goes in the engine.
The radiator is used to cool down the coolant (water plus antifreeze etc) which in turn is used to circulate the engine and prevent it overheating.
Water is put in a radiator because it is used to transfer heat from the engine to the outside environment through the process of convection. The water absorbs heat from the engine and then circulates through the radiator to release it, helping to cool the engine and prevent it from overheating.
To fuel it and cool it
No
"Freon" is the product name of the refrigerant GASused in air conditioning systems. Freon is compressed and expanded to cool the INSIDE of the vehicle.Antifreeze is a LIQUID that is circulated through the engine to keep the engine from melting down. When an engine is running it generates a lot of heat. If the heat is not dissipated, the engine will fail. Water is used to cool the engine and antifreeze is mixed with the water to prevent freezing in the winter and to prevent rust the rest of the time. The water/antifreeze is pumped through the engine then when the water is hot it is pumped through the radiator where it is cooled and pumped back through the engine.
cooling fins are used to cool down the engine by having the cool air pass through the fins which gets transferred down to the engine, so on a motorbike like all other engine's the cooling fins cool down the engine.
Glue, metal bolts and welds.
a radiator is used to cool down the engine using a liquid, whereas an intercooler is used to cool the air going to the engine or cooling the air comming from a turbo. What that does is that there will be more air particles in a defined volume of space if the air is cold, compared to hot air in the same volume of space. This is due to air contracting in cold temperatures. The result is more air going to the engine and therefore more generating more power.
it is used to mix with water and enjoy to drink
with a submarine or a machine called "Alvin"
It's always important to flush your motor with fresh water after operating in salt water. The salt deposits from the salt water used to cool the engine eventually builds up in the cooling system and could clog or restrict the flow of cooling water causing the engine to overheat.