A 35-yard compactor typically has a capacity of around 25 to 30 tons, depending on the material being compacted. The actual weight can vary based on the density of the waste or material, as denser materials will weigh more. Therefore, it’s important to consider the type of waste being compacted to determine the exact tonnage.
x/35 =7 (x/35) *35 = 7 * 35 {multiply both sides by 7} x = 7 * 35 x = 245
If: 9-2x = 35 Then: -2x = 35-9 => -2x = 26 So: x = -13
If 9-2x =35 -2x = 35-9 -2x = 26 -x = 13 x = -13
In degrees? cos(35˚) = .81915, sin(24˚) = .40673;cos(35˚) * sin(24˚) = .33318In radians? cos(35) = -.90367, sin(24) = -.90558;cos(35) * sin(24) = .81836A calculator will achieve these results faster than wiki.answers. 9 times out of 10, at least.:-)
-g is really -1g so divide -1g by -1. what you do to 1 side, you have to do to the other side. so divide 35 by -1. the solution is g= -35
There is approximately 1. 35 tons in a cubic yard of fine sand.
35000kg is 35 tonnes.
35 tons @2,000 pounds per ton.
There are 2,000 pounds in 1 ton. Therefore, to convert tons to pounds, you would multiply the number of tons by 2,000. In this case, 35 tons would be equal to 35 x 2,000 = 70,000 pounds.
There are 105 feet in 35 yards. 35 yards x 3 feet/1 yard = 105 feet 1 yard = 3 feet
11 yards, 2 feet
pile of sand is 28 feet in diameter 12 feet high how many cubic yard
12 inches = 1 foot 3 feet = 1 yard so, 36 inches = 1 yard and 1,260 inches = 35 yards.
3 feet = 1 yard 35 feet = 112/3 yards
The answer can be found by multiplying 35,000,000 x 2,240 (or 2000 if you're using US tons) x 16.
35 tons is equal to 70,000 pounds, as there are 2,000 pounds in a ton.
There are 36 inches in one yard. Therefore, 35 inches is one inch shorter than one yard.