What is the difference between M1 and M2?
difference between offer and acceptance?
difference between offer and acceptance?
there is no difference
tell me
notch is the device used for the measurement of the rate of flow of liquids through small channels at tanks where as orifice is used to measure rate of flow through pipes
JJLLL
The difference is the number of pins per module and to differentiate, the notch is placed in a different position.
To calculate the orifice plate differential pressure, you can use the Bernoulli's equation or the ISO 5167 standard equation. Measure the pressure upstream and downstream of the orifice plate using pressure gauges, then find the difference between these two pressures to determine the differential pressure across the orifice plate.
Synonyms for the word orifice are hole, aperture, opening, vent, pipe, mouth, gape, crack, cranny, crevice, recess, rift, notch, blank, arroyo, chasm, canyon.
An orifice meter works by measuring the pressure difference created when fluid flows through a small opening called an orifice plate. This pressure difference is used to calculate the flow rate of the fluid passing through the meter.
The orifice tube is located between the engine and the fire wall. The windshield wiper cowling has to be removed to gain access to the orifice tube.
An orifice is an opening or hole, whereas a lumen refers to the inner space or cavity within a tubular structure such as a blood vessel or intestine. In simpler terms, an orifice is an opening, while a lumen is the space inside that opening.
Stomach has 2 opening. - cardiac orifice opening of oesophagus into stomach - pyloric orifice opening between stomach and small intestine
Please tell us from which orifice this is emanating, as it does make a difference to the answer .
A restriction orifice (RO) is used to limit the flow through the pipe to a set flow by choking the flow at its sonic velocity. A flow orifice (FO) is usually used to determine the flow through the pipe from the pressure drop over the plate. There a normally two pressure taps (one on each side of the plate) and a pressure transmitter which determines the pressure drop over the plate. A formula is then used to convert this pressure drop to a flowrate for the specific fluid passing through the orifice. A FO usually has a temperature element to determine the gas temperature for use is the formula.
The orifice sits between the gas fitting and the evaporator, taking it apart may be the only way to clear the obstruction, but its a closed system, there isn't anything in there big enough to block the orifice.