0
No, you cannot directly convert a 3.5mm jack (analog audio) to SPDIF (digital audio) using a simple adapter, as they are fundamentally different types of signals. However, you can use a digital audio converter that takes an analog signal from a 3.5mm jack and converts it to a digital SPDIF signal. This typically involves more than just an adapter, as it requires a digital-to-analog converter (DAC) or an audio interface with the appropriate conversion capabilities.
What else can I help you with?
Is it possible to connect notebook with tv through spdif for a sound as I use vga for video with simple jack-jack cable or is it necessary to have some special spdif cable?
OK. Allready solved the problem. As spdif cable is an optical, so laser goest thru that, it's really impossible to connect it with just some jack...
How do you wire a 35mm headphone jack to a car stereo with no secondary input?
you just (bleep) it.
Can a 2.5mm mini jack headphone work in a 3.5mm jack?
No, you will need an audio adapter.
What is a two way 3.55mm jack for?
It is like adapter
How do i get a regular sized USB for an adapter with a single headphone jack?
i need an 8th inch to usb adapter with a full sized USB with a single headphone jack plugin
How to install an aux jack in 2005 avalanche?
I took my 05 Avalanche to Best Buy and purchased an Isimple adapter for about $200.00. This gave me a iPhone adapter and a aux jack for my sirus radio.
How does one add a headphone analog audio out jack to a stereo TV which has only 2 tiny weak speakers and only a coaxial digital audio out orange RCA type jack?
You would have to purchase a Digital to Analog converter and connect the SPDIF (orange RCA connector) to the D/A converter's digital input via a RCA/SPDIF cable. Then you would have to connect some type of headphone amplifier to the line outputs of the D/A converter.
What type of adapter has an rj-11 jack built in?
An adapter with an RJ-11 jack built in is typically a telephone adapter or a DSL modem. These adapters are used to connect telephone lines to devices like modems or fax machines. The RJ-11 jack is designed for standard telephone connections, allowing for communication over traditional phone lines.
What is a 6.3mm plug adapter?
This adapter is also called a TRS adapter,phone jack adapter or a 1/4" adapter among many other names. The 6.3mm jack, originally called the TRS connector was invented for use in telephone switchboards in the 20th century and is still widely used in its original ¼″ (exactly 6.35 mm) size. An adapter would connect another type of plug to the TRS plug (male or female depending on the situation.
What is an adapter for?
An airline adapter is for use of modern headphones. Older planes and headphones used 2 mono audio jacks instead of 1 stereo jack. The adapter brings the 2 mono jacks into 1 stereo jack, so that modern headphones can be used on board the plane.
What is an airline adapter for?
An airline adapter is for use of modern headphones. Older planes and headphones used 2 mono audio jacks instead of 1 stereo jack. The adapter brings the 2 mono jacks into 1 stereo jack, so that modern headphones can be used on board the plane.
What is the purpose of a scissor jack adapter and how does it enhance the functionality of a scissor jack?
A scissor jack adapter is used to increase the lifting range of a scissor jack, allowing it to reach higher or lower points on a vehicle. This enhances the functionality of the scissor jack by providing more flexibility in lifting vehicles of different heights, making it easier to perform maintenance or repairs.
